On 2/11/2020 2:51 AM, Doug Anderson wrote:
Hi,
On Sun, Feb 9, 2020 at 11:41 PM Sharat Masetty <smasetty@xxxxxxxxxxxxxx> wrote:
This patch adds the required dt nodes and properties
to enabled A618 GPU.
Signed-off-by: Sharat Masetty <smasetty@xxxxxxxxxxxxxx>
In v4 I added my tags [1]. Please keep them for future patches unless
something major changes. AKA:
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++
1 file changed, 102 insertions(+)
Just to summarize where we are:
* As per my notes in v3 and v4 [1], this can't land until
"mem_iface_clk" is in the bindings. Please post a patch for this and
reply with a link here so others can follow the disucssion.
I posted a patch for this @https://patchwork.freedesktop.org/patch/354130/
* This also can't land until the gpucc bindings change from Taniya
recently [2] lands.
...so we're in limbo waiting for the bindings to be resolved, but
otherwise this patch looks good.
[1] https://lore.kernel.org/r/CAD=FV=UEQ0mOXuDrSZrcJ8g6jb0eLf1Ttn+Mn7T6d2TpCMUcuA@xxxxxxxxxxxxxx
[2] https://lore.kernel.org/r/1581307266-26989-1-git-send-email-tdas@xxxxxxxxxxxxxx
-Doug
