I used this branch qcom/arm64-for-5.6-to-be-rebased as suggested by Matthias. This patch needs the clock patches and the clock patches have not yet landed, so please apply the following series and patches in order a) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=203517&state=%2a&archive=both b) Patches 1 and 2 from https://patchwork.kernel.org/project/linux-clk/list/?series=203527&archive=both&state=%2a c) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=221739&archive=both&state=%2a d) https://lore.kernel.org/linux-arm-msm/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59%40changeid/raw e) https://patchwork.kernel.org/project/linux-clk/list/?series=238893 f) This patch "arm64: dts: qcom: sc7180: Add A618 gpu dt blob" v3: Addressed review comments from previous submits. Also removed the interconnect bindings from this patch and I will submit as a new patch with its dependencies listed. Also I will be sending a new patch for updating the bindings documentation. v4: Add GX_GDSC power domain binding for GMU v5: Change to a dummy GX_GDSC binding for faster landing v6: Rebased changes on top of Taniyas lastet post((e) in the list above) and adding back the GX_GDSC binding. Sharat Masetty (1): arm64: dts: qcom: sc7180: Add A618 gpu dt blob arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+) -- 1.9.1
