SD/MMC on Colibri iMX7S/D modules successfully support 200Mhz frequency in HS200 mode. Removing the unnecessary max-frequency limit significantly increases the performance: == before fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 252 MB in 3.02 seconds = 83.54 MB/sec ================== === after fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 408 MB in 3.00 seconds = 135.94 MB/sec ================== Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx> Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx> --- Changes in v2: - keep the Fixes tag in the single line arch/arm/boot/dts/imx7-colibri.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index d05be3f0e2a7..04717cf69db0 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -336,7 +336,6 @@ &usdhc3 { assigned-clock-rates = <400000000>; bus-width = <8>; fsl,tuning-step = <2>; - max-frequency = <100000000>; vmmc-supply = <®_module_3v3>; vqmmc-supply = <®_DCDC3>; non-removable; -- 2.24.1