The ICST clocks used in the ARM Integrator, Versatile and RealView platforms are updated to use YAML schema, and two new ICST clocks used by the Integrator IM-PD1 logical module are added in the process. Cc: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- .../bindings/clock/arm,syscon-icst.yaml | 102 ++++++++++++++++++ .../bindings/clock/arm-integrator.txt | 34 ------ .../bindings/clock/arm-syscon-icst.txt | 70 ------------ 3 files changed, 102 insertions(+), 104 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml delete mode 100644 Documentation/devicetree/bindings/clock/arm-integrator.txt delete mode 100644 Documentation/devicetree/bindings/clock/arm-syscon-icst.txt diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml new file mode 100644 index 000000000000..06c4d84e8c3d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM System Conctroller ICST Clocks + +maintainers: + - Linus Walleij <linusw@xxxxxxxxxx> + +description: The ICS525 and ICS307 oscillators are produced by Integrated + Devices Technology (IDT). ARM integrated these oscillators deeply into their + reference designs by adding special control registers that manage such + oscillators to their system controllers. + + The various ARM system controllers contain logic to serialize and initialize + an ICST clock request after a write to the 32 bit register at an offset + into the system controller. Furthermore, to even be able to alter one of + these frequencies, the system controller must first be unlocked by + writing a special token to another offset in the system controller. + + Some ARM hardware contain special versions of the serial interface that only + connects the low 8 bits of the VDW (missing one bit), hardwires RDW to + different values and sometimes also hardwire the output divider. They + therefore have special compatible strings as per this table (the OD value is + the value on the pins, not the resulting output divider). + + In the core modules and logic tiles, the ICST is a configurable clock fed + from a 24 MHz clock on the motherboard (usually the main crystal) used for + generating e.g. video clocks. It is located on the core module and there is + only one of these. This clock node must be a subnode of the core module. + + Hardware variant RDW OD VDW + + Integrator/AP 22 1 Bit 8 0, rest variable + integratorap-cm + + Integrator/AP 46 3 Bit 8 0, rest variable + integratorap-sys + + Integrator/AP 22 or 1 17 or (33 or 25 MHz) + integratorap-pci 14 1 14 + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-core + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-mem + + The ICST oscillator must be provided inside a system controller node. + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - arm,syscon-icst525 + - arm,syscon-icst307 + - arm,syscon-icst525-integratorap-cm + - arm,syscon-icst525-integratorap-sys + - arm,syscon-icst525-integratorap-pci + - arm,syscon-icst525-integratorcp-cm-core + - arm,syscon-icst525-integratorcp-cm-mem + - arm,integrator-cm-auxosc + - arm,versatile-cm-auxosc + - arm,impd-vco1 + - arm,impd-vco2 + + clocks: + description: Parent clock for the ICST VCO + maxItems: 1 + + clock-output-names: + maxItems: 1 + + lock-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the unlocking register for the oscillator + + vco-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the VCO register for the oscillator + +required: + - "#clock-cells" + - compatible + - clocks + +examples: + - | + vco1: clock@00 { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt deleted file mode 100644 index 11f5f95f571b..000000000000 --- a/Documentation/devicetree/bindings/clock/arm-integrator.txt +++ /dev/null @@ -1,34 +0,0 @@ -Clock bindings for ARM Integrator and Versatile Core Module clocks - -Auxiliary Oscillator Clock - -This is a configurable clock fed from a 24 MHz chrystal, -used for generating e.g. video clocks. It is located on the -core module and there is only one of these. - -This clock node *must* be a subnode of the core module, since -it obtains the base address for it's address range from its -parent node. - - -Required properties: -- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc" -- #clock-cells: must be <0> - -Optional properties: -- clocks: parent clock(s) - -Example: - -core-module@10000000 { - xtal24mhz: xtal24mhz@24M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - auxosc: cm_aux_osc@25M { - #clock-cells = <0>; - compatible = "arm,integrator-cm-auxosc"; - clocks = <&xtal24mhz>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt deleted file mode 100644 index 4cd81742038f..000000000000 --- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt +++ /dev/null @@ -1,70 +0,0 @@ -ARM System Controller ICST clocks - -The ICS525 and ICS307 oscillators are produced by Integrated Devices -Technology (IDT). ARM integrated these oscillators deeply into their -reference designs by adding special control registers that manage such -oscillators to their system controllers. - -The various ARM system controllers contain logic to serialize and initialize -an ICST clock request after a write to the 32 bit register at an offset -into the system controller. Furthermore, to even be able to alter one of -these frequencies, the system controller must first be unlocked by -writing a special token to another offset in the system controller. - -Some ARM hardware contain special versions of the serial interface that only -connects the low 8 bits of the VDW (missing one bit), hardwires RDW to -different values and sometimes also hardwire the output divider. They -therefore have special compatible strings as per this table (the OD value is -the value on the pins, not the resulting output divider): - -Hardware variant: RDW OD VDW - -Integrator/AP 22 1 Bit 8 0, rest variable -integratorap-cm - -Integrator/AP 46 3 Bit 8 0, rest variable -integratorap-sys - -Integrator/AP 22 or 1 17 or (33 or 25 MHz) -integratorap-pci 14 1 14 - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-core - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-mem - -The ICST oscillator must be provided inside a system controller node. - -Required properties: -- compatible: must be one of - "arm,syscon-icst525" - "arm,syscon-icst307" - "arm,syscon-icst525-integratorap-cm" - "arm,syscon-icst525-integratorap-sys" - "arm,syscon-icst525-integratorap-pci" - "arm,syscon-icst525-integratorcp-cm-core" - "arm,syscon-icst525-integratorcp-cm-mem" -- lock-offset: the offset address into the system controller where the - unlocking register is located -- vco-offset: the offset address into the system controller where the - ICST control register is located (even 32 bit address) -- #clock-cells: must be <0> -- clocks: parent clock, since the ICST needs a parent clock to derive its - frequency from, this attribute is compulsory. - -Example: - -syscon: syscon@10000000 { - compatible = "syscon"; - reg = <0x10000000 0x1000>; - - oscclk0: osc0@c { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x0c>; - clocks = <&xtal24mhz>; - }; - (...) -}; -- 2.23.0
