From: "Angus Ainslie (Purism)" <angus@xxxxxxxx> use vselect to set the io voltage to 1.8V Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index fbc7062c4633..8f920c554ebd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -789,6 +789,7 @@ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 >; }; @@ -800,6 +801,7 @@ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 >; }; @@ -811,6 +813,7 @@ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 >; }; -- 2.20.1
