Updating bindings of dsi and dpu by adding and removing certain
properties.
Signed-off-by: Harigovindan P <harigovi@xxxxxxxxxxxxxx>
---
Changes in v1:
- Adding "ahb" clock as a required property.
- Adding "bus", "rot", "lut" as optional properties for sc7180 device.
- Removing properties from dsi bindings that are unused.
- Removing power-domain property since DSI is the child node of MDSS
and it will inherit supply from its parent.
Documentation/devicetree/bindings/display/msm/dpu.txt | 7 +++++++
Documentation/devicetree/bindings/display/msm/dsi.txt | 5 -----
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 551ae26..dd58472a 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -19,6 +19,7 @@ Required properties:
The following clocks are required:
* "iface"
* "bus"
+ * "ahb"
* "core"
- interrupts: interrupt signal from MDSS.
- interrupt-controller: identifies the node as an interrupt controller.
@@ -50,6 +51,8 @@ Required properties:
- clock-names: device clock names, must be in same order as clocks property.
The following clocks are required.
* "bus"
+ For the device "qcom,sc7180-dpu":
+ * "bus" - is an optional property due to architecture change.
* "iface"
* "core"
* "vsync"
@@ -70,6 +73,10 @@ Optional properties:
- assigned-clocks: list of clock specifiers for clocks needing rate assignment
- assigned-clock-rates: list of clock frequencies sorted in the same order as
the assigned-clocks property.
+- For the device "qcom,sc7180-dpu":
+ clock-names: optional device clocks, needed for accessing LUT blocks.
+ * "rot"
+ * "lut"
Example:
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index af95586..61d659a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -8,13 +8,10 @@ Required properties:
- reg-names: The names of register regions. The following regions are required:
* "dsi_ctrl"
- interrupts: The interrupt signal from the DSI block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks.
- clock-names: the following clocks are required:
- * "mdp_core"
* "iface"
* "bus"
- * "core_mmss"
* "byte"
* "pixel"
* "core"
@@ -156,7 +153,6 @@ Example:
"core",
"core_mmss",
"iface",
- "mdp_core",
"pixel";
clocks =
<&mmcc MDSS_AXI_CLK>,
@@ -164,7 +160,6 @@ Example:
<&mmcc MDSS_ESC0_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>,
<&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_PCLK0_CLK>;
assigned-clocks =
--
2.7.4
