On Tue, Jan 28, 2020 at 6:31 AM Benjamin GAIGNARD
<benjamin.gaignard@xxxxxx> wrote:
>
>
> On 1/28/20 1:06 PM, Maxime Ripard wrote:
> > Hi Benjamin,
> >
> > On Tue, Jan 28, 2020 at 09:20:13AM +0100, Benjamin Gaignard wrote:
> >> Convert etnaviv bindings to yaml format.
> >>
> >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> >> ---
> >> .../bindings/display/etnaviv/etnaviv-drm.txt | 36 -----------
> >> .../devicetree/bindings/gpu/vivante,gc.yaml | 72 ++++++++++++++++++++++
> >> 2 files changed, 72 insertions(+), 36 deletions(-)
> >> delete mode 100644 Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
> >> create mode 100644 Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
> >> deleted file mode 100644
> >> index 8def11b16a24..000000000000
> >> --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
> >> +++ /dev/null
> >> @@ -1,36 +0,0 @@
> >> -Vivante GPU core devices
> >> -========================
> >> -
> >> -Required properties:
> >> -- compatible: Should be "vivante,gc"
> >> - A more specific compatible is not needed, as the cores contain chip
> >> - identification registers at fixed locations, which provide all the
> >> - necessary information to the driver.
> >> -- reg: should be register base and length as documented in the
> >> - datasheet
> >> -- interrupts: Should contain the cores interrupt line
> >> -- clocks: should contain one clock for entry in clock-names
> >> - see Documentation/devicetree/bindings/clock/clock-bindings.txt
> >> -- clock-names:
> >> - - "bus": AXI/master interface clock
> >> - - "reg": AHB/slave interface clock
> >> - (only required if GPU can gate slave interface independently)
> >> - - "core": GPU core clock
> >> - - "shader": Shader clock (only required if GPU has feature PIPE_3D)
> >> -
> >> -Optional properties:
> >> -- power-domains: a power domain consumer specifier according to
> >> - Documentation/devicetree/bindings/power/power_domain.txt
> >> -
> >> -example:
> >> -
> >> -gpu_3d: gpu@130000 {
> >> - compatible = "vivante,gc";
> >> - reg = <0x00130000 0x4000>;
> >> - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
> >> - clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
> >> - <&clks IMX6QDL_CLK_GPU3D_CORE>,
> >> - <&clks IMX6QDL_CLK_GPU3D_SHADER>;
> >> - clock-names = "bus", "core", "shader";
> >> - power-domains = <&gpc 1>;
> >> -};
> >> diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> >> new file mode 100644
> >> index 000000000000..c4f549c0d750
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> >> @@ -0,0 +1,72 @@
> >> +# SPDX-License-Identifier: GPL-2.0
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Vivante GPU Bindings
> >> +
> >> +description: Vivante GPU core devices
> >> +
> >> +maintainers:
> >> + - Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> >> +
> >> +properties:
> >> + compatible:
> >> + const: vivante,gc
> >> +
> >> + reg:
> >> + maxItems: 1
> >> +
> >> + interrupts:
> >> + maxItems: 1
> >> +
> >> + clocks:
> >> + items:
> >> + - description: AXI/master interface clock
> >> + - description: GPU core clock
> >> + - description: Shader clock (only required if GPU has feature PIPE_3D)
> >> + - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
> > Can you have an AHB slave interface clock without a shader clock?
>
> No because the items in the list are ordered so you need to have, in
> order: "bus", "core", "shader", "reg"
>
> If it is needed to allow any number of clock in any order I could write
> it like this:
Yes, but I prefer we don't allow any order if we don't have to. Did
you run this schema against dtbs_check or just audit the dts files
with vivante?
Rob
