From: Edward Kigwana <ekigwana@xxxxxxxxx> This change adds the device-tree bindings documentation for the ADF4360 family of PLLs. Signed-off-by: Edward Kigwana <ekigwana@xxxxxxxxx> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- .../bindings/iio/frequency/adi,adf4360.yaml | 137 ++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml new file mode 100644 index 000000000000..895e2cb2b300 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2019-2020 Edward Kigwana +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,adf4360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADF4360 PLL device driver + +maintainers: + - Lars-Peter Clausen <lars@xxxxxxxxxx> + - Edward Kigwana <ekigwana@xxxxxxxxx> + +description: | + Bindings for the Analog Devices ADF4360 family of clock generator phase-locked + loop (PLL) devices with an integrated voltage-controlled oscillator (VCO). + Each of the parts in the family supports a specific frequency range. + Datasheets can be found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-0.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-1.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-3.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-5.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-6.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-7.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-9.pdf + +properties: + compatible: + pattern: '^adi,adf4360-[0-9]$' + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: clkin + + '#clock-cells': + const: 0 + + adi,loop-filter-pfd-frequency-hz: + description: | + The phase-frequency-detector frequency that the external loop filter was + designed for. + allOf: + - minimum: 25000 + - maximum: 8000000 + maxItems: 1 + + adi,loop-filter-charger-pump-current-microamp: + description: | + The charge pump current that the external loop filter was designed for. + The provided value is clamped to the closest enumerated value. + enum: [ 310, 620, 930, 1250, 1560, 1870, 2180, 2500 ] + + adi,vco-minimum-frequency-hz: + description: | + Required for ADF4360-7, ADF4360-8 and ADF4360-9. Minimum VCO frequency + that can be supported by the tuning range set by the external inductor. + maxItems: 1 + + adi,vco-maximum-frequency-hz: + description: | + Required for ADF4360-7, ADF4360-8 and ADF4360-9. Maximum VCO frequency + that can be supported by the tuning range set by the external inductor. + maxItems: 1 + + adi,loop-filter-inverting: + description: Indicates that the external loop filter is an inverting filter. + type: boolean + + adi,power-up-frequency-hz: + description: | + PLL tunes to the set frequency on probe or defaults to either the minimum + for the part or value set using adi,vco-minimum-frequency-hz. + maxItems: 1 + + vdd-supply: + description: | + vdd supply is used to enable or disable chip when regulator power down + mode is set. Other power down modes are used to mitigate the case of a + shared regulator. + + enable-gpios: + description: | + Chip enable gpio is used to enable or disable chip when chip enable power + down mode is set. + maxItems: 1 + + adi,muxout-gpios: + description: | + MUX out gpio is used to detect chip and test pll lock state on read when + muxout control is set to lock detect. + maxItems: 1 + + adi,power-out-level-microamp: + description: | + Chip support setting of output power level. This property is optional. + If it is not provided by default 11000 uA will be set. + enum: [ 3500, 5000, 7500, 11000 ] + +required: + - compatible + - reg + - clocks + - clock-names + - adi,loop-filter-charge-pump-current + - adi,loop-filter-pfd-frequency-hz + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + pll@0 { + compatible = "adi,adf4360-7"; + reg = <0>; + spi-max-frequency = <2000000>; + clocks = <&ref_clock>; + #clock-cells = <0>; + clock-names = "clkin"; + clock-output-names = "adf4360-7"; + + adi,loop-filter-charge-pump-current = <5>; + adi,loop-filter-pfd-frequency-hz = <2500000>; + adi,vco-minimum-frequency-hz = <700000000>; + adi,vco-maximum-frequency-hz = <840000000>; + }; + }; +... -- 2.20.1
