On 27/01/2020 18:42, Rob Herring wrote:
> On Wed, Jan 22, 2020 at 11:45:17AM +0100, Yuti Amonkar wrote:
>> From: Swapnil Jakhade <sjakhade@xxxxxxxxxxx>
>>
>> Add sub-node bindings for each group of PHY lanes based on PHY
>> type. Only PHY_TYPE_DP is supported currently. Each sub-node
>
> What the driver supports is not relevant to the binding. Define all
> modes.
>
>> includes properties such as master lane number, link reset, phy
>> type, number of lanes etc.
>
> Given the conversion and this have no compatibility, just make the
> commits delete the old binding and add this new binding. I'd rather not
> have reviewed what just gets deleted here.
>
>>
>> Signed-off-by: Swapnil Jakhade <sjakhade@xxxxxxxxxxx>
>> ---
>> .../bindings/phy/phy-cadence-torrent.yaml | 90 ++++++++++++++++++----
>> 1 file changed, 73 insertions(+), 17 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
>> index dbb8aa5..eb21615 100644
>> --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
>> +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
>> @@ -19,6 +19,12 @@ properties:
>> - cdns,torrent-phy
>> - ti,j721e-serdes-10g
>>
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> clocks:
>> maxItems: 1
>> description:
>> @@ -41,44 +47,94 @@ properties:
>> - const: torrent_phy
>> - const: dptx_phy
>>
>> - "#phy-cells":
>> - const: 0
>> + resets:
>> + description:
>> + Must contain an entry for each in reset-names.
>> + See Documentation/devicetree/bindings/reset/reset.txt
>
> How many reset entries? Needs a 'maxItems: 1' or an 'items' list if more
> than 1.
>
>>
>> - num_lanes:
>> + reset-names:
>> description:
>> - Number of DisplayPort lanes.
>> - allOf:
>> - - $ref: /schemas/types.yaml#/definitions/uint32
>> - - enum: [1, 2, 4]
>> + Must be "torrent_reset". It controls the reset to the
>
> Should be a schema, not freeform text. However, not really a useful name
> as there's only 1, so I'd just remove 'reset-names'.
>
This binding is trying to follow "cdns,sierra-phy-t0" binding [1] when
it makes sense. Sierra defines two resets here. But if we can not name
the other reset now (at least I can not), I guess we can just drop the
reset-names here.
>> + torrent PHY.
>>
>> - max_bit_rate:
>> +patternProperties:
>> + '^torrent-phy@[0-7]+$':
>> + type: object
>> description:
>> - Maximum DisplayPort link bit rate to use, in Mbps
>> - allOf:
>> - - $ref: /schemas/types.yaml#/definitions/uint32
>> - - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
>> + Each group of PHY lanes with a single master lane should be represented as a sub-node.
>> + properties:
>> + reg:
>> + description:
>> + The master lane number. This is the lowest numbered lane in the lane group.
>
> Why not make it the list of lane numbers. Then you don't need num-lanes.
>
Sierra binding already defines this method [1] and my plan was to rely
on this method when selecting the lane types in the
"ti,phy-j721e-wiz"-driver [2].
IOW, I would like the both Sierra and Torrent bindings (which both are
wrapped by the wiz wrapper IP) to be compatible enough for wiz driver to
peek the lane types from the wrapped phy-node.
>> +
>> + resets:
>> + description:
>> + Contains list of resets to get all the link lanes out of reset.
>
> Needs a schema for how many? 1 per lane?
>
That is what the current implementation is, but do we have to lock it
down in the binding? There can hardly be more than 1 / lane, but I can
imagine it to be just one for a number of lanes.
>> +
>> + "#phy-cells":
>> + description:
>> + Generic PHY binding.
>
> Not a useful description. Remove.
>
>> + const: 0
>> +
>> + cdns,phy-type:
>> + description:
>> + Should be PHY_TYPE_DP.
>
> Sounds like a constraint.
>
I do not think there is point to limit this to PHY_TYPE_DP only. The
current implementation may not support anything else but DP, but we
should not limit the binding because of it. I think referring to the
include/dt-bindings/phy/phy.h header here would be appropriate.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> +
>> + cdns,num-lanes:
>> + description:
>> + Number of DisplayPort lanes.
>> + allOf:
>> + - $ref: /schemas/types.yaml#/definitions/uint32
>> + - enum: [1, 2, 4]
>> +
>> + cdns,max-bit-rate:
>> + description:
>> + Maximum DisplayPort link bit rate to use, in Mbps
>> + allOf:
>> + - $ref: /schemas/types.yaml#/definitions/uint32
>> + - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
>> +
>> + required:
>> + - reg
>> + - resets
>> + - "#phy-cells"
>> + - cdns,phy-type
>
> Add (for the child nodes):
>
> addtionalProperties: false
>
>>
>> required:
>> - compatible
>> + - "#address-cells"
>> + - "#size-cells"
>> - clocks
>> - clock-names
>> - reg
>> - reg-names
>> - - "#phy-cells"
>> + - resets
>> + - reset-names
>>
>> additionalProperties: false
>>
>> examples:
>> - |
>> - dp_phy: phy@f0fb500000 {
>> + #include <dt-bindings/phy/phy.h>
>> + torrent_phy: phy@f0fb500000 {
>> compatible = "cdns,torrent-phy";
>> reg = <0xf0 0xfb500000 0x0 0x00100000>,
>> <0xf0 0xfb030a00 0x0 0x00000040>;
>> reg-names = "torrent_phy", "dptx_phy";
>> - num_lanes = <4>;
>> - max_bit_rate = <8100>;
>> - #phy-cells = <0>;
>> + resets = <&phyrst 0>;
>> + reset-names = "torrent_reset";
>> clocks = <&ref_clk>;
>> clock-names = "refclk";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + torrent_phy_dp: torrent-phy@0 {
>
> Just 'phy@...'
>
>> + reg = <0>;
>> + resets = <&phyrst 1>;
>> + #phy-cells = <0>;
>> + cdns,phy-type = <PHY_TYPE_DP>;
>> + cdns,num-lanes = <4>;
>> + cdns,max-bit-rate = <8100>;
>> + };
>> };
>> ...
>> --
>> 2.4.5
>>
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/tree/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt?h=next
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/tree/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml?h=next
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
