21.01.2020 17:21, Sameer Pujar пишет:
[snip]
>>> +static int tegra210_i2s_put_control(struct snd_kcontrol *kcontrol,
>>> + struct snd_ctl_elem_value *ucontrol)
>> Checkpatch should complain about the wrong indentation here.
>
> I had run checkpatch before sending the patch, below is the result.
> -----
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #70:
> new file mode 100644
>
> total: 0 errors, 1 warnings, 1103 lines checked
>
> NOTE: For some of the reported defects, checkpatch may be able to
> mechanically convert to the typical style using --fix or
> --fix-inplace.
> -----
Using 'checkpatch --strict':
CHECK: Alignment should match open parenthesis
#2693: FILE: sound/soc/tegra/tegra210_i2s.c:362:
+static int tegra210_i2s_put_control(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol
[snip]
>>> +
>>> + } else if (strstr(kcontrol->id.name, "Playback Audio Bit Format"))
>>> + i2s->audio_fmt_override[I2S_RX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Capture Audio Bit Format"))
>>> + i2s->audio_fmt_override[I2S_TX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Client Bit Format"))
>>> + i2s->client_fmt_override = value;
>>> + else if (strstr(kcontrol->id.name, "Playback Audio Channels"))
>>> + i2s->audio_ch_override[I2S_RX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Capture Audio Channels"))
>>> + i2s->audio_ch_override[I2S_TX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Client Channels"))
>>> + i2s->client_ch_override = value;
>>> + else if (strstr(kcontrol->id.name, "Capture Stereo To Mono"))
>>> + i2s->stereo_to_mono[I2S_TX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Capture Mono To Stereo"))
>>> + i2s->mono_to_stereo[I2S_TX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Playback Stereo To Mono"))
>>> + i2s->stereo_to_mono[I2S_RX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
>>> + i2s->mono_to_stereo[I2S_RX_PATH] = value;
>>> + else if (strstr(kcontrol->id.name, "Playback FIFO Threshold"))
>>> + i2s->rx_fifo_th = value;
>>> + else if (strstr(kcontrol->id.name, "BCLK Ratio"))
>>> + i2s->bclk_ratio = value;
>> I'm pretty sure that checkpatch should complain about the missing
>> brackets, they should make code's indentation uniform and thus easier to
>> read. Same for all other occurrences in the code.
>
> same as above
CHECK: braces {} should be used on all arms of this statement
#2699: FILE: sound/soc/tegra/tegra210_i2s.c:368:
+ if (strstr(kcontrol->id.name, "Loopback")) {
[...]
+ } else if (strstr(kcontrol->id.name, "Sample Rate"))
[...]
+ else if (strstr(kcontrol->id.name, "FSYNC Width")) {
[...]
+ } else if (strstr(kcontrol->id.name, "Playback Audio Bit Format"))
[...]
+ else if (strstr(kcontrol->id.name, "Capture Audio Bit Format"))
[...]
+ else if (strstr(kcontrol->id.name, "Client Bit Format"))
[...]
+ else if (strstr(kcontrol->id.name, "Playback Audio Channels"))
[...]
+ else if (strstr(kcontrol->id.name, "Capture Audio Channels"))
[...]
+ else if (strstr(kcontrol->id.name, "Client Channels"))
[...]
+ else if (strstr(kcontrol->id.name, "Capture Stereo To Mono"))
[...]
+ else if (strstr(kcontrol->id.name, "Capture Mono To Stereo"))
[...]
+ else if (strstr(kcontrol->id.name, "Playback Stereo To Mono"))
[...]
+ else if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
[...]
+ else if (strstr(kcontrol->id.name, "Playback FIFO Threshold"))
[...]
+ else if (strstr(kcontrol->id.name, "BCLK Ratio"))
[...]
[snip]
>>> + pm_runtime_enable(dev);
>> Error checking?
>
> return type for above is void()
Ok
>>> + return 0;
>>> +}
>>> +
>>> +static int tegra210_i2s_remove(struct platform_device *pdev)
>>> +{
>>> + pm_runtime_disable(&pdev->dev);
>>> + if (!pm_runtime_status_suspended(&pdev->dev))
>>> + tegra210_i2s_runtime_suspend(&pdev->dev);
>> This breaks device's RPM refcounting if it was disabled in the active
>> state. This code should be removed. At most you could warn about the
>> unxpected RPM state here, but it shouldn't be necessary.
>
> I guess this was added for safety and explicit suspend keeps clock
> disabled.
> Not sure if ref-counting of the device matters when runtime PM is
> disabled and device is removed.
> I see few drivers using this way.
It should matter (if I'm not missing something) because RPM should be in
a wrecked state once you'll try to re-load the driver's module. Likely
that those few other drivers are wrong.
[snip]
>
>>> + int rx_fifo_th;
>> Could rx_fifo_th be negative?
>
> rx_fifo_th itself does not take negative values, explicit typecasting> is avoided in "if" condition by declaring this as "int"
Explicit typecasting isn't needed for integers.
