The Denali NAND controller IP has separate reset control for the controller core and registers. Add the reset-names, and one more phandle accordingly. This is the approved DT-binding. Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 3 ++- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 3 ++- arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 8ec40a0b8b1e..5b18bda9c5a6 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -633,7 +633,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index b658f2b641e2..f2dc5f695020 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -937,7 +937,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index d6f6cee4d549..73e7e1203b09 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -795,7 +795,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; -- 2.17.1
