On Mon, Jan 13, 2020 at 03:08:39PM +0000, Vadim Pasternak wrote:
> Add support for devices XDPE12254, XDPE12284.
>
> All these device support two pages.
> The below lists of VOUT_MODE command readout with their related VID
> protocols, Digital to Analog Converter steps, supported by these
> devices:
> VR12.0 mode, 5-mV DAC - 0x01;
> VR12.5 mode, 10-mV DAC - 0x02;
> IMVP9 mode, 5-mV DAC - 0x03;
> AMD mode 6.25mV - 0x10.
>
> Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
Applied to hwmon-next (with fix applied - see below).
Thanks,
Guenter
> ---
> RFC-v1:
> Changes added by Vadim:
> - Add format for current in;
> - Extend functions for both pages with "PMBUS_HAVE_IIN",
> "PMBUS_HAVE_PIN" and "PMBUS_HAVE_STATUS_INPUT".
> - Drop others than xdpe12284, xdpe12254 devices, since there is not
> clear confirmation from Infineon regarding availability of the
> others.
> ---
> drivers/hwmon/pmbus/Kconfig | 9 ++++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/xdpe12284.c | 116 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 126 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/xdpe12284.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 0dd30b07bf18..128e91de5209 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -228,6 +228,15 @@ config SENSORS_UCD9200
> This driver can also be built as a module. If so, the module will
> be called ucd9200.
>
> +config SENSORS_XDPE122
> + tristate "Infineon XDPE122 family"
> + help
> + If you say yes here you get hardware monitoring support for Infineon
> + XDPE12254, XDPE12284, device.
> +
> + This driver can also be built as a module. If so, the module will
> + be called xdpe12284.
> +
> config SENSORS_ZL6100
> tristate "Intersil ZL6100 and compatibles"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 3f8c1014938b..5421fcc0a01c 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -26,4 +26,5 @@ obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
> obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
> obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
> obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
> +obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
> obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
> diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c
> new file mode 100644
> index 000000000000..cb03ce30a527
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/xdpe12284.c
> @@ -0,0 +1,116 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Hardware monitoring driver for Infineon Multi-phase Digital VR Controllers
> + *
> + * Copyright (c) 2020 Mellanox Technologies. All rights reserved.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include "pmbus.h"
> +
> +#define XDPE122_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */
> +#define XDPE122_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */
> +#define XDPE122_PROT_IMVP9_10MV 0x03 /* IMVP9 mode, 10-mV DAC */
> +#define XDPE122_AMD_625MV 0x10 /* AMD mode 6.25mV */
> +#define XDPE122_PAGE_NUM 2
> +
> +static int xdpe122_identify(struct i2c_client *client,
> + struct pmbus_driver_info *info)
> +{
> + u8 vout_params;
> + int i, ret;
> +
> + for (i = 0; i < XDPE122_PAGE_NUM; i++) {
> + /* Read the register with VOUT scaling value.*/
> + ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
> + if (ret < 0)
> + return ret;
> +
> + vout_params = ret & GENMASK(4, 0);
> +
> + switch (vout_params) {
> + case XDPE122_PROT_VR12_5_10MV:
> + info->vrm_version[i] = vr13;
> + break;
> + case XDPE122_PROT_VR12_5MV:
> + info->vrm_version[i] = vr12;
> + break;
> + case XDPE122_PROT_IMVP9_10MV:
> + info->vrm_version[i] = imvp9;
break;
> + case XDPE122_AMD_625MV:
> + info->vrm_version[i] = amd625mv;
> + break;
> + default:
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static struct pmbus_driver_info xdpe122_info = {
> + .pages = XDPE122_PAGE_NUM,
> + .format[PSC_VOLTAGE_IN] = linear,
> + .format[PSC_VOLTAGE_OUT] = vid,
> + .format[PSC_TEMPERATURE] = linear,
> + .format[PSC_CURRENT_IN] = linear,
> + .format[PSC_CURRENT_OUT] = linear,
> + .format[PSC_POWER] = linear,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
> + PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
> + .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
> + PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
> + .identify = xdpe122_identify,
> +};
> +
> +static int xdpe122_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct pmbus_driver_info *info;
> +
> + info = devm_kmemdup(&client->dev, &xdpe122_info, sizeof(*info),
> + GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + return pmbus_do_probe(client, id, info);
> +}
> +
> +static const struct i2c_device_id xdpe122_id[] = {
> + {"xdpe12254", 0},
> + {"xdpe12284", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, xdpe122_id);
> +
> +static const struct of_device_id __maybe_unused xdpe122_of_match[] = {
> + {.compatible = "infineon, xdpe12254"},
> + {.compatible = "infineon, xdpe12284"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, xdpe122_of_match);
> +
> +static struct i2c_driver xdpe122_driver = {
> + .driver = {
> + .name = "xdpe12284",
> + .of_match_table = of_match_ptr(xdpe122_of_match),
> + },
> + .probe = xdpe122_probe,
> + .remove = pmbus_do_remove,
> + .id_table = xdpe122_id,
> +};
> +
> +module_i2c_driver(xdpe122_driver);
> +
> +MODULE_AUTHOR("Vadim Pasternak <vadimp@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("PMBus driver for Infineon XDPE122 family");
> +MODULE_LICENSE("GPL");
