Add support for devices XDPE12254, XDPE12284.
All these device support two pages.
The below lists of VOUT_MODE command readout with their related VID
protocols, Digital to Analog Converter steps, supported by these
devices:
VR12.0 mode, 5-mV DAC - 0x01;
VR12.5 mode, 10-mV DAC - 0x02;
IMVP9 mode, 5-mV DAC - 0x03;
AMD mode 6.25mV - 0x10.
Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
---
RFC-v1:
Changes added by Vadim:
- Add format for current in;
- Extend functions for both pages with "PMBUS_HAVE_IIN",
"PMBUS_HAVE_PIN" and "PMBUS_HAVE_STATUS_INPUT".
- Drop others than xdpe12284, xdpe12254 devices, since there is not
clear confirmation from Infineon regarding availability of the
others.
---
drivers/hwmon/pmbus/Kconfig | 9 ++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/xdpe12284.c | 116 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 126 insertions(+)
create mode 100644 drivers/hwmon/pmbus/xdpe12284.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 0dd30b07bf18..128e91de5209 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -228,6 +228,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_XDPE122
+ tristate "Infineon XDPE122 family"
+ help
+ If you say yes here you get hardware monitoring support for Infineon
+ XDPE12254, XDPE12284, device.
+
+ This driver can also be built as a module. If so, the module will
+ be called xdpe12284.
+
config SENSORS_ZL6100
tristate "Intersil ZL6100 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 3f8c1014938b..5421fcc0a01c 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c
new file mode 100644
index 000000000000..cb03ce30a527
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdpe12284.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Infineon Multi-phase Digital VR Controllers
+ *
+ * Copyright (c) 2020 Mellanox Technologies. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define XDPE122_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */
+#define XDPE122_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */
+#define XDPE122_PROT_IMVP9_10MV 0x03 /* IMVP9 mode, 10-mV DAC */
+#define XDPE122_AMD_625MV 0x10 /* AMD mode 6.25mV */
+#define XDPE122_PAGE_NUM 2
+
+static int xdpe122_identify(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ u8 vout_params;
+ int i, ret;
+
+ for (i = 0; i < XDPE122_PAGE_NUM; i++) {
+ /* Read the register with VOUT scaling value.*/
+ ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
+ if (ret < 0)
+ return ret;
+
+ vout_params = ret & GENMASK(4, 0);
+
+ switch (vout_params) {
+ case XDPE122_PROT_VR12_5_10MV:
+ info->vrm_version[i] = vr13;
+ break;
+ case XDPE122_PROT_VR12_5MV:
+ info->vrm_version[i] = vr12;
+ break;
+ case XDPE122_PROT_IMVP9_10MV:
+ info->vrm_version[i] = imvp9;
+ case XDPE122_AMD_625MV:
+ info->vrm_version[i] = amd625mv;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static struct pmbus_driver_info xdpe122_info = {
+ .pages = XDPE122_PAGE_NUM,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = vid,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_POWER] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+ .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+ .identify = xdpe122_identify,
+};
+
+static int xdpe122_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pmbus_driver_info *info;
+
+ info = devm_kmemdup(&client->dev, &xdpe122_info, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id xdpe122_id[] = {
+ {"xdpe12254", 0},
+ {"xdpe12284", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, xdpe122_id);
+
+static const struct of_device_id __maybe_unused xdpe122_of_match[] = {
+ {.compatible = "infineon, xdpe12254"},
+ {.compatible = "infineon, xdpe12284"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, xdpe122_of_match);
+
+static struct i2c_driver xdpe122_driver = {
+ .driver = {
+ .name = "xdpe12284",
+ .of_match_table = of_match_ptr(xdpe122_of_match),
+ },
+ .probe = xdpe122_probe,
+ .remove = pmbus_do_remove,
+ .id_table = xdpe122_id,
+};
+
+module_i2c_driver(xdpe122_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for Infineon XDPE122 family");
+MODULE_LICENSE("GPL");
--
2.11.0
