Remove chip whildcard and introduce the list of compatibles instead. Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> --- Documentation/devicetree/bindings/mfd/atmel-usart.txt | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 699fd3c9ace8..778e8310606a 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -1,10 +1,9 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties for USART: -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" - The compatible <chip> indicated will be the first SoC to support an - additional mode or an USART new feature. - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" +- compatible: Should be one of the following: + - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" + - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. -- 2.7.4
