Hi, Shawn
> Subject: Re: [PATCH 1/5] ARM: dts: imx6qdl-sabresd: Remove incorrect
> power supply assignment
>
> On Thu, Jan 09, 2020 at 08:25:03AM +0000, Anson Huang wrote:
> > Hi, Shawn
> >
> > > Subject: Re: [PATCH 1/5] ARM: dts: imx6qdl-sabresd: Remove incorrect
> > > power supply assignment
> > >
> > > On Mon, Dec 30, 2019 at 09:41:07AM +0800, Anson Huang wrote:
> > > > The vdd3p0's input should be from external USB VBUS directly, NOT
> > >
> > > Shouldn't USB VBUS usually be 5V? It doesn't seem to match 3.0V
> > > which is suggested by vdd3p0 name.
> > >
> > > > PMIC's sw2, so remove the power supply assignment for vdd3p0.
> > > >
> > > > Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign
> > > > corresponding power supply for LDOs")
> > >
> > > Is it only a description correcting or is it fixing a real problem?
> > > I'm trying to understand it is a 5.5-rc material or can be applied for 5.6.
> > >
> >
> > It is fixing a real problem about USB LDO voltage, that is why we noticed
> this issue.
>
> Okay, please describe the problem a little bit in the commit log. Also squash
> the series into one patch, which is easier to be merged into -rc as a fix.
OK, will send a new patch with squashing them together, but will NOT have the fix tag,
is it OK? As the fix tag are different for each patch.
>
> My question above that USB VUBS is 5V which doesn't match 3.0V suggested
> by vdd3p0 name remains unaddressed though.
The vdd3p0 is a LDO, the input is the USB VBUS 5V, output can be programmed to
3.2V, I think the name is from the target output voltage.
Anson
