Hi Shawn, On Wed, Oct 30, 2019 at 02:31:20PM +0530, Manivannan Sadhasivam wrote: > Hello, > > This patchset adds support for Thor96 board from Einfochips. This board is > one of the 96Boards Consumer Edition platform powered by the NXP i.MX8MQ > SoC. > > Following are the features supported currently: > > 1. uSD > 2. WiFi/BT > 3. Ethernet > 4. EEPROM (M24256) > 5. NOR Flash (W25Q256JW) > 6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion > > More information about this board can be found in Arrow website: > https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools > > Link to 96Boards CE Specification: https://linaro.co/ce-specification > > Expecting patch 1 to go through LED/Rob's tree, 4 through MTD tree > and 2,3 through Freescale tree. > Any update here? Patch 4 is already merged. Thanks, Mani > Thanks, > Mani > > Changes in v2: > > * Added patch for documenting commonly used LED triggers > * Added Reviewed-by tags for bindings patch > * Changed, fsl,uart-has-rtscts to uart-has-rtscts in dts > * Modified the commit message of MTD patch > > Manivannan Sadhasivam (4): > dt-bindings: leds: Document commonly used LED triggers > dt-bindings: arm: Add devicetree binding for Thor96 Board > arm64: dts: freescale: Add devicetree support for Thor96 board > mtd: spi-nor: Add support for w25q256jw > > .../devicetree/bindings/arm/fsl.yaml | 1 + > .../devicetree/bindings/leds/common.txt | 17 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/imx8mq-thor96.dts | 581 ++++++++++++++++++ > drivers/mtd/spi-nor/spi-nor.c | 2 + > 5 files changed, 602 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts > > -- > 2.17.1 >
