Hello, This patchset adds support for Thor96 board from Einfochips. This board is one of the 96Boards Consumer Edition platform powered by the NXP i.MX8MQ SoC. Following are the features supported currently: 1. uSD 2. WiFi/BT 3. Ethernet 4. EEPROM (M24256) 5. NOR Flash (W25Q256JW) 6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion More information about this board can be found in Arrow website: https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools Link to 96Boards CE Specification: https://linaro.co/ce-specification Expecting patch 1 to go through LED/Rob's tree, 4 through MTD tree and 2,3 through Freescale tree. Thanks, Mani Changes in v2: * Added patch for documenting commonly used LED triggers * Added Reviewed-by tags for bindings patch * Changed, fsl,uart-has-rtscts to uart-has-rtscts in dts * Modified the commit message of MTD patch Manivannan Sadhasivam (4): dt-bindings: leds: Document commonly used LED triggers dt-bindings: arm: Add devicetree binding for Thor96 Board arm64: dts: freescale: Add devicetree support for Thor96 board mtd: spi-nor: Add support for w25q256jw .../devicetree/bindings/arm/fsl.yaml | 1 + .../devicetree/bindings/leds/common.txt | 17 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mq-thor96.dts | 581 ++++++++++++++++++ drivers/mtd/spi-nor/spi-nor.c | 2 + 5 files changed, 602 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts -- 2.17.1
