Enable USB2 PHY for Meson A1 SoC.
Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 6fdc0dd..3cae8e9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
/ {
compatible = "amlogic,a1";
@@ -100,6 +101,17 @@
#power-domain-cells = <1>;
status = "okay";
};
+
+ usb2_phy1: phy@40000 {
+ status = "okay";
+ compatible = "amlogic,a1-usb2-phy";
+ clocks = <&clkc_periphs CLKID_XTAL_USB_PHY>;
+ clock-names = "xtal_usb_phy";
+ reg = <0x0 0x40000 0x0 0x2000>;
+ resets = <&reset RESET_USBPHY>;
+ #phy-cells = <0>;
+ power-domains = <&pwrc PWRC_USB_ID>;
+ };
};
gic: interrupt-controller@ff901000 {
--
2.7.4
