Memory address/size depends on board design, so memory node should be in board DT. Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 5 +++++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index cf044dd..9e54747 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -16,6 +16,11 @@ stdout-path = &uart2; }; + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index a3d179b..1e5e115 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -140,11 +140,6 @@ }; }; - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0x80000000>; - }; - osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>; -- 2.7.4