Re: [PATCH 05/17] pci: host: pcie-dra7xx: add support for pcie-dra7xx controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thursday 08 May 2014 17:56:38 Jingoo Han wrote:
> On Wednesday, May 07, 2014 6:26 PM, Arnd Bergmann wrote:
> > On Wednesday 07 May 2014 14:52:47 Kishon Vijay Abraham I wrote:
> > > On Tuesday 06 May 2014 10:05 PM, Jason Gunthorpe wrote:
> > > > On Tue, May 06, 2014 at 07:03:51PM +0530, Kishon Vijay Abraham I wrote:
> > > >> +Example:
> > > >> +pcie@51000000 {
> > > >> +    compatible = "ti,dra7xx-pcie";
> > > >> +    reg = <0x51002000 0x14c>, <0x51000000 0x2000>;
> > > >> +    reg-names = "ti_conf", "rc_dbics";
> > > >> +    interrupts = <0 232 0x4>, <0 233 0x4>;
> > > >> +    #address-cells = >;
> > > >> +    #size-cells = <2>;
> > > >> +    device_type = "pci";
> > > >> +    ti,device_type = >;
> > > >> +    ranges = <0x00000800 0 0x20001000 0x20001000 0 0x00002000  /* Configuration Space */
> > > >
> > > > Configuration space should not show up in the ranges, please don't
> > > > copy that mistake from other drivers, put it in reg.
> > >
> > > But then it needs pcie-designware.c to be modified and it will be breaking
> > > other platforms no?
> > 
> > I think the pcie-designware driver should be changed to allow either way.
> > Ideally we would deprecate the existing method in a way that for new front-ends
> > it doesn't work, but the old front-ends can still deal with it but also work
> > if you put it into the reg property.
> 
> (+cc Pratyush Anand, Thierry Reding)
> 
> Hi Arnd,
> 
> Thank you for your comment.
> Do you mean the case of Tegra PCIe as below?
> 
> ./arch/arm/boot/dts/tegra20.dts
>         pcie-controller@80003000 {
>                 ...
>                 reg = <0x80003000 0x00000800   /* PADS registers */
>                          0x80003800 0x00000200   /* AFI registers */
>                          0x90000000 0x10000000>; /* configuration space */
>                 ...
>                 ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
>                         0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
>                         0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
>                         0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
>                         0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
>                 ...
> 
> ./drivers/pci/host/pci-tegra.c
>         /* request configuration space, but remap later, on demand */
>         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs");
>         ...
>         pcie->cs = devm_request_mem_region(pcie->dev, res->start,
>                                                 resource_size(res), res->name);

Yes, that is how the config space should be handled normally.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux