Re: [PATCHv2 2/2] Documentation: dt: add an optional dma-desc-enable property for dwc2 usb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello.

On 07-05-2014 3:00, dinguyen@xxxxxxxxxx wrote:

From: Dinh Nguyen <dinguyen@xxxxxxxxxx>

The "dma-desc-enable" property can be used to enable descriptor DMA mode
for the DWC2 USB IP.

Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
---
v2: Reword property description to enable instead of disable
---
  Documentation/devicetree/bindings/usb/dwc2.txt |    7 +++++++
  1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index b8b6871..9b471b5 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -14,6 +14,13 @@ Refer to clk/clock-bindings.txt for generic clock consumer properties
  Optional properties:
  - phys: phy provider specifier
  - phy-names: shall be "device"
+- dma-desc-enable: Should be <1> to enable descriptor dma mode. This
+	property is used to enable descriptor DMA support. The reason why
+	this property is needed is because the HW supports descriptor DMA
+	mode, but descriptor dma mode will not support SPLIT transactions.
+	So this property can be used to optionally enable descriptor DMA
+	support.

   Why not make this property boolean?

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux