On Thu, Dec 26, 2019 at 08:47:47PM +0800, Frank Lee wrote: > On Thu, Dec 26, 2019 at 6:44 PM Corentin Labbe > <clabbe.montjoie@xxxxxxxxx> wrote: > > > > On Thu, Dec 26, 2019 at 10:27:51AM +0100, Maxime Ripard wrote: > > > On Tue, Dec 24, 2019 at 07:30:55PM +0100, Daniel Lezcano wrote: > > > > On 19/12/2019 18:33, Maxime Ripard wrote: > > > > > Hi, > > > > > > > > > > On Thu, Dec 19, 2019 at 09:28:16AM -0800, Vasily Khoruzhick wrote: > > > > >> This patchset adds driver for thermal sensor in A64, A83T, H3, H5, > > > > >> H6 and R40 SoCs. > > > > > > > > > > Thanks again for working on this. > > > > > > > > > > I'll merge the DT patches when the driver will have been merged. > > > > > > > > I've applied patches 1 & 2. > > > > > > > > They are in the testing branch and will go to the linux-next branch as > > > > soon as the kernelci passes. > > > > > > I just merged all the other patches (except the patch 6, for the H6, > > > as requested by Vasily on IRC). > > > > > > > Hello > > > > Vasily asked to not apply H6 due to my test failling on h6 and since he didnt own any H6 hw. > > But it was failling due my fault (a failling build). > > > > So the patchset work perfect on H6 (opi1+, opi3, pineH64 both model A and B) as reported by my answer to this thread. > > HI Corentin, > > Although it is not calibrated, it should work on the R40. Can you give > my patch a try? > > Thx， > Yangtao > Hello It works: uname -a Linux zlad 5.5.0-rc2-next-20191220+ #196 SMP PREEMPT Sun Dec 29 22:08:05 CET 2019 armv7l ARMv7 Processor rev 5 (v7l) Allwinner sun8i Family GNU/Linux cat /sys/devices/virtual/thermal/thermal_zone0/temp 30736 cat /sys/devices/virtual/thermal/thermal_zone0/type cpu0-thermal cat /sys/devices/virtual/thermal/thermal_zone1/temp 29380 cat /sys/devices/virtual/thermal/thermal_zone1/type gpu-thermal So you could add to your patch: Tested-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx> Tested-on: sun8i-r40-bananapi-m2-ultra thanks Regards
