For a long time the only 10G interface mode registered in the code was XGMII and some PHYs and MACs that actually supported other modes just used that to denote 10G. Recently more modes were added (USXGMII, 10GKR) to better match the actual HW support. In this respect, the use of 10GBase-KR to denote not only backplane but also XFI and SFI can be improved upon. This patch series introduces XFI and SFI PHY connection types and initial users for them. Madalin Bucur (6): net: phy: add interface modes for XFI, SFI arm64: dts: ls104xardb: set correct PHY interface mode net: fsl/fman: rename IF_MODE_XGMII to IF_MODE_10G net: fsl/fman: add support for PHY_INTERFACE_MODE_XFI net: fsl/fman: add support for PHY_INTERFACE_MODE_SFI net: phy: aquantia: add support for PHY_INTERFACE_MODE_XFI arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++-- drivers/net/ethernet/freescale/fman/fman_memac.c | 10 +++++++--- drivers/net/ethernet/freescale/fman/mac.c | 10 +++++++--- drivers/net/phy/aquantia_main.c | 5 ++++- include/linux/phy.h | 7 ++++++- 6 files changed, 27 insertions(+), 11 deletions(-) -- 2.1.0
