Clarify disable-wp text.
Clean up and add that "disable-wp" is not used in combination
with eMMC or SDIO.
Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index b130450c3..3c0df4016 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -96,11 +96,10 @@ properties:
description:
When set, no physical write-protect line is present. This
property should only be specified when the controller has a
- dedicated write-protect detection logic. If a GPIO is always
- used for the write-protect detection. If a GPIO is always used
+ dedicated write-protect detection logic. If a GPIO is always used
for the write-protect detection logic, it is sufficient to not
specify the wp-gpios property in the absence of a write-protect
- line.
+ line. Not used in combination with eMMC or SDIO.
wp-gpios:
description:
--
2.11.0
