Re: [PATCH 1/2] dt: bindings: net: ath11k: add qcom,board_id definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



John Crispin <john@xxxxxxxxxxx> writes:

> We need to be able to define what id the board has allowing us to load the
> correct definition data. This patch adds the description of the required
> property.
>
> Signed-off-by: John Crispin <john@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/wireless/qcom,ath11k.yaml        | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> index a1717db36dba..c68daf6ad424 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> @@ -142,6 +142,11 @@ properties:
>          * reg
>          * reg-names
>  
> +  qcom,board_id:
> +      $ref: /schemas/types.yaml#/definitions/uint32
> +      description:
> +        The board id defining what board definition should be loaded

I think this needs more discussion. This is very tricky to get right, as
it needs to be extensible and what not. With ath10k we have learned that
a simple integer is not enough.

-- 
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux