Re: [PATCH 09/13] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 19/12/19 5:38 am, Rob Herring wrote:
> On Mon, Dec 09, 2019 at 02:51:43PM +0530, Kishon Vijay Abraham I wrote:
>> Add host mode dt-bindings for TI's J721E SoC.
>>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>>  .../bindings/pci/ti,j721e-pci-host.yaml       | 161 ++++++++++++++++++
>>  1 file changed, 161 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>> new file mode 100644
>> index 000000000000..96184e1f419f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>> @@ -0,0 +1,161 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#";
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
>> +
>> +title: TI J721E PCI Host (PCIe Wrapper)
>> +
>> +maintainers:
>> +  - Kishon Vijay Abraham I <kishon@xxxxxx>
> 
> There's now a PCI bus schema. Reference it here:
> 
> allOf:
>   - $ref: "/schemas/pci/pci-bus.yaml#"
> 
>> +
>> +properties:
>> +  compatible:
>> +      enum:
>> +          - ti,j721e-pcie-host
> 
> Indentation.
> 
>> +
>> +  reg:
>> +    maxItems: 4
>> +
>> +  reg-names:
>> +    items:
>> +      - const: intd_cfg
>> +      - const: user_cfg
>> +      - const: reg
>> +      - const: cfg
>> +
>> +  ti,syscon-pcie-ctrl:
>> +    description: Phandle to the SYSCON entry required for configuring PCIe mode
>> +                 and link speed.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/phandle
> 
> You can drop the 'allOf' here if there aren't more constraints.
> 
>> +
>> +  max-link-speed:
>> +    minimum: 1
>> +    maximum: 3
>> +
>> +  num-lanes:
>> +    minimum: 1
>> +    maximum: 2
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +    description: clock-specifier to represent input to the PCIe
>> +
>> +  clock-names:
>> +    items:
>> +      - const: fck
>> +
> 
>> +  "#address-cells":
>> +    const: 3
>> +
>> +  "#size-cells":
>> +    const: 2
>> +
>> +  bus-range:
>> +    description: Range of bus numbers associated with this controller.
> 
> Drop these 3 as they are all standard.
> 
>> +
>> +  cdns,max-outbound-regions:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/int32
> 
> Can be negative? Use uint32.
> 
> The int* definitions are kind of broken until dtc is fixed to maintain 
> sign.
> 
>> +      - enum: [16]
> 
> const: 16
> 
>> +
>> +  cdns,no-bar-match-nbits:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/int32
>> +      - enum: [64]
>> +
>> +  vendor-id:
>> +    const: 0x104c
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> 
> And elsewhere. Drop the description.
> 
>> +
>> +  device-id:
>> +    const: 0xb00d
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +
>> +  msi-map: true
>> +
>> +  dma-coherent:
>> +    description: Indicates that the PCIe IP block can ensure the coherency
>> +
>> +  ranges: true
> 
> Don't you know how many?
> 
>> +
>> +  reset-gpios:
>> +    description: GPIO specifier for the PERST# signal
>> +
>> +  phys:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +
>> +  phy-names:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - reg-names
>> +  - ti,syscon-pcie-ctrl
>> +  - max-link-speed
>> +  - num-lanes
>> +  - power-domains
>> +  - clocks
>> +  - clock-names
> 
>> +  - "#address-cells"
>> +  - "#size-cells"
> 
> Can drop these 2. The bus schema requires them.
> 
>> +  - bus-range
>> +  - cdns,max-outbound-regions
>> +  - cdns,no-bar-match-nbits
>> +  - vendor-id
>> +  - device-id
>> +  - msi-map
>> +  - dma-coherent
>> +  - ranges
> 
> Can drop, too.
> 
>> +  - reset-gpios
> 
> Isn't having this board dependent?

All board dts files should have it though.
I'll fix all the comments given here.

Thanks
Kishon



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux