Re: [PATCH v3 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Dec 18, 2019 at 4:41 AM Sandeep Maheswaram (Temp)
<sanm@xxxxxxxxxxxxxx> wrote:
> +  assigned-clock-rates:
> +    description:
> +      Should be 19.2MHz (19200000) for MOCK_UTMI_CLK
> +      >=125MHz (125000000) for MASTER_CLK in SS mode
> +      >=60MHz (60000000) for MASTER_CLK in HS mode
> +    maxItems: 2
>
> You can still express some limits here even if we don't go all out
> with the "oneOf".  AKA I think this is better:
>
> assigned-clock-rates:
>   items:
>     - const: 19200000
>     - minimum: 60000000
>       description: >= 60 MHz in HS mode, >= 125 MHz in SS mode
>
> Facing error when i add as above.
> properties:assigned-clock-rates: {'items': [{'const': 19200000}, {'minimum': 60000000}]} is not valid under any of the given schemas
> Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/usb/qcom,dwc3.example.dts' failed

I couldn't figure it out either.  ...but at least this seemed to work
and is slightly better than what you have:

  assigned-clock-rates:
    items:
      - description: Must be 19.2MHz (19200000)
      - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode

So I'd say go with that.


-Doug



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux