[PATCH] arm64: dts: sc7180: Enable video node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a preparation gerrit to enable video node for sc7180.
This change depends on patch series Venus new features.

Signed-off-by: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 52a5861..ccf9ef5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1297,6 +1297,34 @@
 
 			#freq-domain-cells = <1>;
 		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7180-venus";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>;
+
+			power-domain-names = "venus", "vcodec0";
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				<&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				<&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				<&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+					"vcodec0_core", "vcodec0_bus";
+			iommus = <&apps_smmu 0x0C00 0x60>;
+			memory-region = <&venus_mem>;
+			video-core0 {
+					compatible = "venus-decoder";
+			};
+			video-core1 {
+					compatible = "venus-encoder";
+			};
+			video-firmware {
+					iommus = <&apps_smmu 0x0C42 0x0>;
+			};
+		};
 	};
 
 	thermal-zones {
-- 
1.9.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux