> -----Original Message----- > From: Stephen Boyd <sboyd@xxxxxxxxxx> > Sent: 2019年12月17日 1:56 > To: Leo Li <leoyang.li@xxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; > Michael Turquette <mturquette@xxxxxxxxxxxx>; Michael Walle > <michael@xxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Wen He > <wen.he_1@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx > Subject: [EXT] Re: [v11 2/2] clk: ls1028a: Add clock driver for Display output > interface > > Caution: EXT Email > > Quoting Michael Walle (2019-12-12 16:06:16) > > Am 12. Dezember 2019 23:18:16 MEZ schrieb Stephen Boyd > <sboyd@xxxxxxxxxx>: > > >Quoting Wen He (2019-12-04 23:26:53) > > >> Add clock driver for QorIQ LS1028A Display output interfaces(LCD, > > >DPHY), > > >> as implemented in TSMC CLN28HPM PLL, this PLL supports the > > >programmable > > >> integer division and range of the display output pixel clock's > > >27-594MHz. > > >> > > >> Signed-off-by: Wen He <wen.he_1@xxxxxxx> > > >> Signed-off-by: Michael Walle <michael@xxxxxxxx> > > > > > >Is Michael the author? SoB chain is backwards here. > > > > the original driver was from Wen. I've just supplied some code and the > > vco frequency stuff. so its basically a sob of us both. > > > > -michael > > Ok. That's a Co-developed-by: tag then. Thanks for letting us know. The v12 version patch was sent out. Does need I change the author sign to below? Co-developed-by: Wen He <wen.he_1@xxxxxxx> Signed-off-by: Wen He <wen.he_1@xxxxxxx> Co-developed-by: Michael Walle <michael.@xxxxxxxx> Signed-off-by: Michael Walle <michael.@xxxxxxxx> Signed-off-by: Wen He <wen.he_1@xxxxxxx> Best Regards, Wen
