On Tue, Dec 10, 2019 at 4:42 PM Khouloud Touil <ktouil@xxxxxxxxxxxx> wrote:
> + wp-gpios:
> + description:
> + GPIO to which the write-protect pin of the chip is connected.
> + The write-protect GPIO is asserted, when it's driven high
> + (logical '1') to block the write operation. It's deasserted,
> + when it's driven low (logical '0') to allow writing.
> + maxItems: 1
OK I guess we can't get it less convoluted. This section is consistent.
> patternProperties:
> "^.*@[0-9a-f]+$":
> type: object
> @@ -66,6 +74,7 @@ examples:
> qfprom: eeprom@700000 {
> #address-cells = <1>;
> #size-cells = <1>;
> + wp-gpios = <&gpio1 3 0>;
In the example please use the include for GPIO:
#include <dt-bindings/gpio/gpio.h>
wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
You can just put the #include directive right before the
example, it should work fine.
Yours,
Linus Walleij
