Add DT bindings for PCIe controller implemented in UniPhier SoCs
when configured in endpoint mode. This controller is based on
the DesignWare PCIe core.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
.../devicetree/bindings/pci/uniphier-pcie-ep.txt | 47 ++++++++++++++++++++++
MAINTAINERS | 2 +-
2 files changed, 48 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt
new file mode 100644
index 00000000..56cb891
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt
@@ -0,0 +1,47 @@
+Socionext UniPhier PCIe endpoint controller bindings
+
+This describes the devicetree bindings for PCIe endpoint controller
+implemented on Socionext UniPhier SoCs.
+
+UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
+PCI core. It shares common functions with the PCIe DesignWare core driver
+and inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
+
+Required properties:
+- compatible: Should be
+ "socionext,uniphier-pro5-pcie-ep" for Pro5 SoC
+- reg: Specifies offset and length of the register set for the device.
+ According to the reg-names, appropriate register sets are required.
+- reg-names: Must include the following entries:
+ "dbi" - controller configuration registers
+ "dbi2" - controller configuration registers for shadow
+ "link" - SoC-specific glue layer registers
+ "addr_space" - PCIe configuration space
+- clocks: A phandle to the clock gate for PCIe glue layer including
+ the endpoint controller.
+- resets: A phandle to the reset line for PCIe glue layer including
+ the endpoint controller.
+
+Optional properties:
+- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
+ phys are required.
+- phy-names: Must be "pcie-phy".
+
+Example:
+
+ pcie_ep: pcie-ep@66000000 {
+ compatible = "socionext,uniphier-pro5-pcie-ep",
+ "snps,dw-pcie-ep";
+ status = "disabled";
+ reg-names = "dbi", "dbi2", "link", "addr_space";
+ reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+ <0x66010000 0x10000>, <0x67000000 0x400000>;
+ clocks = <&sys_clk 24>;
+ resets = <&sys_rst 24>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ num-lanes = <4>;
+ phy-names = "pcie-phy";
+ phys = <&pcie_phy>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d3a5c5..4b6ec28 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12694,7 +12694,7 @@ PCIE DRIVER FOR SOCIONEXT UNIPHIER
M: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
L: linux-pci@xxxxxxxxxxxxxxx
S: Maintained
-F: Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+F: Documentation/devicetree/bindings/pci/uniphier-pcie*.txt
F: drivers/pci/controller/dwc/pcie-uniphier.c
PCIE DRIVER FOR ST SPEAR13XX
--
2.7.4
