Hi Hsin-Yi,
Thank you for the patch.
On Mon, Dec 09, 2019 at 10:50:13PM +0800, Hsin-Yi Wang wrote:
> From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
>
> Add support for analogix,anx7688
>
> Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> ---
> .../bindings/display/bridge/anx7688.txt | 32 +++++++++++++++++++
How about converting this to yaml bindings already ? It's fairly simple
and gives you DT validation.
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.txt b/Documentation/devicetree/bindings/display/bridge/anx7688.txt
> new file mode 100644
> index 000000000000..78b55bdb18f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/anx7688.txt
> @@ -0,0 +1,32 @@
> +Analogix ANX7688 SlimPort (Single-Chip Transmitter for DP over USB-C)
> +---------------------------------------------------------------------
> +
> +The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per
> +second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video
> +resolution from a smartphone or tablet with full function USB-C.
> +
> +This binding only describes the HDMI to DP display bridge.
> +
> +Required properties:
> +
> + - compatible : "analogix,anx7688"
> + - reg : I2C address of the device (fixed at 0x2c)
> +
> +Optional properties:
> +
> + - Video port for HDMI input, using the DT bindings defined in [1].
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> + anx7688: anx7688@2c {
> + compatible = "analogix,anx7688";
> + reg = <0x2c>;
> +
> + port {
> + anx7688_in: endpoint {
> + remote-endpoint = <&hdmi0_out>;
> + };
> + };
> + };
> --
> 2.24.0.393.g34dc348eaf-goog
>
--
Regards,
Laurent Pinchart
