Hi Adrian,
And sorry for this late reply.
Your patches look good and we ("stm guys") understand that v1.01 is very
different to v1.30/31.
We are doing our best to review & test your patches and we will go back
to you asap.
Many thanks,
Philippe :-)
On 12/2/19 8:33 PM, Adrian Ratiu wrote:
> Having a generic Synopsis DesignWare MIPI-DSI host controller bridge
> driver is a very good idea, however the current implementation has
> hardcoded quite a lot of the register layouts used by the two supported
> SoC vendors, STM and Rockchip, which use IP cores v1.30 and v1.31.
>
> This makes it hard to support other SoC vendors like the FSL/NXP i.MX 6
> which use older v1.01 cores or future versions because, based on history,
> layout changes should also be expected in new DSI versions / SoCs.
>
> This patch series converts the bridge and platform drivers to access
> registers via generic regmap APIs and allows each platform driver to
> configure its register layout via struct reg_fields, then adds support
> for the host controller found on i.MX 6.
>
> I only have i.MX hardware with MIPI-DSI panel and relevant documentation
> available for testing so I'll really appreciate it if someone could test
> the series on Rockchip and STM... eyeballing register fields could only
> get me so far, so sorry in advance for any breakage!
>
> Many thanks to Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> for
> suggesting the regmap solution and to Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
> for doing the initial i.MX platform driver implementation.
>
> This series applies on top of latest linux-next tree, next-20191202.
>
> v3 -> v4:
> * Added commmit message to dt-binding patch (Neil)
> * Converted the dt-binding to yaml dt-schema format (Neil)
> * Small DT node + driver fixes (Rob)
> * Renamed platform driver to reflect it's only for i.MX v6 (Fabio)
> * Added small panel example to the host controller DT binding
>
> v2 -> v3:
> * Added const declarations to dw-mipi-dsi.c structs (Emil)
> * Fixed Reviewed-by tags and cc'd some more relevant ML (Emil)
>
> v1 -> v2:
> * Moved register definitions & regmap initialization into bridge
> module. Platform drivers get the regmap via plat_data after calling
> the bridge probe (Emil).
>
> Adrian Ratiu (4):
> drm: bridge: dw_mipi_dsi: access registers via a regmap
> drm: bridge: dw_mipi_dsi: abstract register access using reg_fields
> drm: imx: Add i.MX 6 MIPI DSI host driver
> dt-bindings: display: add i.MX6 MIPI DSI host controller doc
>
> .../display/imx/fsl,mipi-dsi-imx6.yaml | 136 ++++
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 699 +++++++++++++-----
> drivers/gpu/drm/imx/Kconfig | 7 +
> drivers/gpu/drm/imx/Makefile | 1 +
> drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 378 ++++++++++
> .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 17 +-
> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 34 +-
> include/drm/bridge/dw_mipi_dsi.h | 2 +-
> 8 files changed, 1067 insertions(+), 207 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
> create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
>
