Add a node for the XDMA engine with all the necessary information. Also
make the EDAC node compatible with syscon.
Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
---
Changes since v1:
- Add syscon compatible to the SDRAM controller so we can grab it in the
XDMA driver
- Add the new properties to the XDMA node
arch/arm/boot/dts/aspeed-g5.dtsi | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index df44022..6a83cd2 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
/ {
model = "Aspeed BMC";
@@ -48,7 +49,7 @@
};
edac: sdram@1e6e0000 {
- compatible = "aspeed,ast2500-sdram-edac";
+ compatible = "aspeed,ast2500-sdram-edac", "syscon";
reg = <0x1e6e0000 0x174>;
interrupts = <0>;
status = "disabled";
@@ -258,6 +259,18 @@
interrupts = <0x19>;
};
+ xdma: xdma@1e6e7000 {
+ compatible = "aspeed,ast2500-xdma";
+ reg = <0x1e6e7000 0x100>;
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ resets = <&syscon ASPEED_RESET_XDMA>;
+ interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+ pcie-device = "bmc";
+ scu = <&syscon>;
+ sdmc = <&edac>;
+ status = "disabled";
+ };
+
adc: adc@1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
--
1.8.3.1
