On Thu, Nov 28, 2019 at 09:30:44PM +0100, Christoph Fritz wrote:
> Hi Shawn,
>
> any chance to get this patch queued for the upcoming kernel?
Sorry, no. I need to wait for DA9063_BUCK_MODE_SYNC landing on 5.5-rc1,
and then apply this DTS patch.
Shawn
>
> bye
> -- Christoph
>
> On Wed, 2019-11-13 at 16:26 +0000, Adam Thomson wrote:
> > On 13 November 2019 13:40, Christoph Fritz wrote:
> >
> > > This patch sets initial buck regulator modes explicitly to a state this
> > > hardware needs. So a wrong initial mode set by bootloader or pmic itself
> > > does not interfere anymore.
> > >
> > > Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
> >
> > Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
> >
> > > ---
> > > arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 5 +++++
> > > 1 file changed, 5 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
> > > b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
> > > index 6486df3..644625d 100644
> > > --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
> > > +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
> > > @@ -5,6 +5,7 @@
> > > */
> > >
> > > #include <dt-bindings/gpio/gpio.h>
> > > +#include <dt-bindings/regulator/dlg,da9063-regulator.h>
> > >
> > > / {
> > > aliases {
> > > @@ -109,6 +110,7 @@
> > > regulator-name = "vdd_arm";
> > > regulator-min-microvolt = <730000>;
> > > regulator-max-microvolt = <1380000>;
> > > + regulator-initial-mode =
> > > <DA9063_BUCK_MODE_SYNC>;
> > > regulator-always-on;
> > > };
> > >
> > > @@ -116,6 +118,7 @@
> > > regulator-name = "vdd_soc";
> > > regulator-min-microvolt = <730000>;
> > > regulator-max-microvolt = <1380000>;
> > > + regulator-initial-mode =
> > > <DA9063_BUCK_MODE_SYNC>;
> > > regulator-always-on;
> > > };
> > >
> > > @@ -123,6 +126,7 @@
> > > regulator-name = "vdd_ddr3";
> > > regulator-min-microvolt = <1500000>;
> > > regulator-max-microvolt = <1500000>;
> > > + regulator-initial-mode =
> > > <DA9063_BUCK_MODE_SYNC>;
> > > regulator-always-on;
> > > };
> > >
> > > @@ -130,6 +134,7 @@
> > > regulator-name = "vdd_eth";
> > > regulator-min-microvolt = <1200000>;
> > > regulator-max-microvolt = <1200000>;
> > > + regulator-initial-mode =
> > > <DA9063_BUCK_MODE_SYNC>;
> > > regulator-always-on;
> > > };
> > >
> > > --
> > > 2.1.4
> >
>
>
>
