Hi Jack,
On 2019/12/2 下午11:35, Jack Chen wrote:
From: Jack Chen <redchenjs@xxxxxxxx>
The Tinker Board / S devices use a special chip variant called rk3288-c
and use different operating points with a higher max frequency.
So add the missing operating points for Tinker Board / S devices, also
increase the vdd_cpu regulator-max-microvolt to 1400000 uV so that the
cpu can operate at 1.8 GHz.
Signed-off-by: Jack Chen <redchenjs@xxxxxxxx>
This patch looks good to me,
Reviewed-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
Thanks,
- Kever
---
arch/arm/boot/dts/rk3288-tinker.dtsi | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 81e4e953d4a4..09e83b3d5e7d 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -113,6 +113,17 @@
cpu0-supply = <&vdd_cpu>;
};
+&cpu_opp_table {
+ opp-1704000000 {
+ opp-hz = /bits/ 64 <1704000000>;
+ opp-microvolt = <1350000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1400000>;
+ };
+};
+
&gmac {
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
@@ -175,7 +186,7 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
+ regulator-max-microvolt = <1400000>;
regulator-name = "vdd_arm";
regulator-ramp-delay = <6000>;
regulator-state-mem {
