RPMh power controller hosts mx domain that can be used as thermal warming device. Add #cooling-cells property to the power domain provider node to indicate this. Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx> --- v3->v4: - Removed subnode to indicate that mx power domain is a warming device. Instead #cooling-cells is used as a power domain provider property to indicate if the provider hosts a power domain that can be used as a warming device. Documentation/devicetree/bindings/power/qcom,rpmpd.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt index bc75bf4..a193d33 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt @@ -19,6 +19,11 @@ Required Properties: Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for various OPPs for different platforms as well as Power domain indexes +Optional Properties + - #cooling-cells: must be 2 + RPMh also hosts power domains that can behave as thermal warming + device. If so, indicate this by specifying #cooling-cells. + Example: rpmh power domain controller and OPP table #include <dt-bindings/power/qcom-rpmhpd.h> -- 2.1.4
