Re: [PATCH v6 3/5] arm64: dts: qcom: qcs404: Add CPR and populate OPP table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 19 Nov 07:46 PST 2019, Niklas Cassel wrote:

> Add CPR and populate OPP table.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs404.dtsi | 132 +++++++++++++++++++++++++--
>  1 file changed, 124 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index d03782e7bc11..30b9c7f8f200 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -44,7 +44,8 @@
>  			#cooling-cells = <2>;
>  			clocks = <&apcs_glb>;
>  			operating-points-v2 = <&cpu_opp_table>;
> -			cpu-supply = <&pms405_s3>;
> +			power-domains = <&cpr>;
> +			power-domain-names = "cpr";
>  		};
>  
>  		CPU1: cpu@101 {
> @@ -57,7 +58,8 @@
>  			#cooling-cells = <2>;
>  			clocks = <&apcs_glb>;
>  			operating-points-v2 = <&cpu_opp_table>;
> -			cpu-supply = <&pms405_s3>;
> +			power-domains = <&cpr>;
> +			power-domain-names = "cpr";
>  		};
>  
>  		CPU2: cpu@102 {
> @@ -70,7 +72,8 @@
>  			#cooling-cells = <2>;
>  			clocks = <&apcs_glb>;
>  			operating-points-v2 = <&cpu_opp_table>;
> -			cpu-supply = <&pms405_s3>;
> +			power-domains = <&cpr>;
> +			power-domain-names = "cpr";
>  		};
>  
>  		CPU3: cpu@103 {
> @@ -83,7 +86,8 @@
>  			#cooling-cells = <2>;
>  			clocks = <&apcs_glb>;
>  			operating-points-v2 = <&cpu_opp_table>;
> -			cpu-supply = <&pms405_s3>;
> +			power-domains = <&cpr>;
> +			power-domain-names = "cpr";
>  		};
>  
>  		L2_0: l2-cache {
> @@ -107,20 +111,37 @@
>  	};
>  
>  	cpu_opp_table: cpu-opp-table {
> -		compatible = "operating-points-v2";
> +		compatible = "operating-points-v2-kryo-cpu";
>  		opp-shared;
>  
>  		opp-1094400000 {
>  			opp-hz = /bits/ 64 <1094400000>;
> -			opp-microvolt = <1224000 1224000 1224000>;
> +			required-opps = <&cpr_opp1>;
>  		};
>  		opp-1248000000 {
>  			opp-hz = /bits/ 64 <1248000000>;
> -			opp-microvolt = <1288000 1288000 1288000>;
> +			required-opps = <&cpr_opp2>;
>  		};
>  		opp-1401600000 {
>  			opp-hz = /bits/ 64 <1401600000>;
> -			opp-microvolt = <1384000 1384000 1384000>;
> +			required-opps = <&cpr_opp3>;
> +		};
> +	};
> +
> +	cpr_opp_table: cpr-opp-table {
> +		compatible = "operating-points-v2-qcom-level";
> +
> +		cpr_opp1: opp1 {
> +			opp-level = <1>;
> +			qcom,opp-fuse-level = <1>;
> +		};
> +		cpr_opp2: opp2 {
> +			opp-level = <2>;
> +			qcom,opp-fuse-level = <2>;
> +		};
> +		cpr_opp3: opp3 {
> +			opp-level = <3>;
> +			qcom,opp-fuse-level = <3>;
>  		};
>  	};
>  
> @@ -310,6 +331,62 @@
>  			tsens_caldata: caldata@d0 {
>  				reg = <0x1f8 0x14>;
>  			};
> +			cpr_efuse_speedbin: speedbin@13c {
> +				reg = <0x13c 0x4>;
> +				bits = <2 3>;
> +			};
> +			cpr_efuse_quot_offset1: qoffset1@231 {
> +				reg = <0x231 0x4>;
> +				bits = <4 7>;
> +			};
> +			cpr_efuse_quot_offset2: qoffset2@232 {
> +				reg = <0x232 0x4>;
> +				bits = <3 7>;
> +			};
> +			cpr_efuse_quot_offset3: qoffset3@233 {
> +				reg = <0x233 0x4>;
> +				bits = <2 7>;
> +			};
> +			cpr_efuse_init_voltage1: ivoltage1@229 {
> +				reg = <0x229 0x4>;
> +				bits = <4 6>;
> +			};
> +			cpr_efuse_init_voltage2: ivoltage2@22a {
> +				reg = <0x22a 0x4>;
> +				bits = <2 6>;
> +			};
> +			cpr_efuse_init_voltage3: ivoltage3@22b {
> +				reg = <0x22b 0x4>;
> +				bits = <0 6>;
> +			};
> +			cpr_efuse_quot1: quot1@22b {
> +				reg = <0x22b 0x4>;
> +				bits = <6 12>;
> +			};
> +			cpr_efuse_quot2: quot2@22d {
> +				reg = <0x22d 0x4>;
> +				bits = <2 12>;
> +			};
> +			cpr_efuse_quot3: quot3@230 {
> +				reg = <0x230 0x4>;
> +				bits = <0 12>;
> +			};
> +			cpr_efuse_ring1: ring1@228 {
> +				reg = <0x228 0x4>;
> +				bits = <0 3>;
> +			};
> +			cpr_efuse_ring2: ring2@228 {
> +				reg = <0x228 0x4>;
> +				bits = <4 3>;
> +			};
> +			cpr_efuse_ring3: ring3@229 {
> +				reg = <0x229 0x4>;
> +				bits = <0 3>;
> +			};
> +			cpr_efuse_revision: revision@218 {
> +				reg = <0x218 0x4>;
> +				bits = <3 3>;
> +			};
>  		};
>  
>  		rng: rng@e3000 {
> @@ -952,6 +1029,45 @@
>  			clocks = <&sleep_clk>;
>  		};
>  
> +		cpr: power-controller@b018000 {
> +			compatible = "qcom,qcs404-cpr", "qcom,cpr";
> +			reg = <0x0b018000 0x1000>;
> +			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&xo_board>;
> +			clock-names = "ref";
> +			vdd-apc-supply = <&pms405_s3>;
> +			#power-domain-cells = <0>;
> +			operating-points-v2 = <&cpr_opp_table>;
> +			acc-syscon = <&tcsr>;
> +
> +			nvmem-cells = <&cpr_efuse_quot_offset1>,
> +				<&cpr_efuse_quot_offset2>,
> +				<&cpr_efuse_quot_offset3>,
> +				<&cpr_efuse_init_voltage1>,
> +				<&cpr_efuse_init_voltage2>,
> +				<&cpr_efuse_init_voltage3>,
> +				<&cpr_efuse_quot1>,
> +				<&cpr_efuse_quot2>,
> +				<&cpr_efuse_quot3>,
> +				<&cpr_efuse_ring1>,
> +				<&cpr_efuse_ring2>,
> +				<&cpr_efuse_ring3>,
> +				<&cpr_efuse_revision>;
> +			nvmem-cell-names = "cpr_quotient_offset1",
> +				"cpr_quotient_offset2",
> +				"cpr_quotient_offset3",
> +				"cpr_init_voltage1",
> +				"cpr_init_voltage2",
> +				"cpr_init_voltage3",
> +				"cpr_quotient1",
> +				"cpr_quotient2",
> +				"cpr_quotient3",
> +				"cpr_ring_osc1",
> +				"cpr_ring_osc2",
> +				"cpr_ring_osc3",
> +				"cpr_fuse_revision";
> +		};
> +
>  		timer@b120000 {
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> -- 
> 2.23.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux