Sylwester Nawrocki wrote:
>
> S5PV210 is going to get DT support, so we can remove the camera
> bits from the only board using camera on S5PV210. This allows to
> clean the exynos4-is driver by dropping code for non-dt platforms.
> This patch can be dropped if a patch removing the whole board
> file is applied first.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Hi Sylwester,
Cleanup is always welcome ;-)
I think, when this series is ready for mainline, this will be handled in
media tree. So,
Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Thanks,
Kukjin
> ---
> arch/arm/mach-s5pv210/mach-goni.c | 51
---------------------------------
> ----
> 1 file changed, 51 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-
> s5pv210/mach-goni.c
> index b41a38a..6c719ec 100644
> --- a/arch/arm/mach-s5pv210/mach-goni.c
> +++ b/arch/arm/mach-s5pv210/mach-goni.c
> @@ -49,11 +49,6 @@
> #include <plat/clock.h>
> #include <plat/samsung-time.h>
> #include <plat/mfc.h>
> -#include <plat/camport.h>
> -
> -#include <media/v4l2-mediabus.h>
> -#include <media/s5p_fimc.h>
> -#include <media/noon010pc30.h>
>
> #include "common.h"
>
> @@ -285,14 +280,6 @@ static void __init goni_tsp_init(void)
> /* USB OTG */
> static struct s3c_hsotg_plat goni_hsotg_pdata;
>
> -static void goni_camera_init(void)
> -{
> - s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
> -
> - /* Set max driver strength on CAM_A_CLKOUT pin. */
> - s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
> -}
> -
> /* MAX8998 regulators */
> #if defined(CONFIG_REGULATOR_MAX8998) ||
> defined(CONFIG_REGULATOR_MAX8998_MODULE)
>
> @@ -825,34 +812,6 @@ static void goni_setup_sdhci(void)
> s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
> };
>
> -static struct noon010pc30_platform_data noon010pc30_pldata = {
> - .clk_rate = 16000000UL,
> - .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
> - .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
> -};
> -
> -static struct i2c_board_info noon010pc30_board_info = {
> - I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
> - .platform_data = &noon010pc30_pldata,
> -};
> -
> -static struct fimc_source_info goni_camera_sensors[] = {
> - {
> - .mux_id = 0,
> - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
> - V4L2_MBUS_VSYNC_ACTIVE_LOW,
> - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
> - .board_info = &noon010pc30_board_info,
> - .i2c_bus_num = 0,
> - .clk_frequency = 16000000UL,
> - },
> -};
> -
> -static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
> - .source_info = goni_camera_sensors,
> - .num_clients = ARRAY_SIZE(goni_camera_sensors),
> -};
> -
> /* Audio device */
> static struct platform_device goni_device_audio = {
> .name = "smdk-audio",
> @@ -874,10 +833,6 @@ static struct platform_device *goni_devices[]
> __initdata = {
> &s5p_device_mixer,
> &s5p_device_sdo,
> &s3c_device_i2c0,
> - &s5p_device_fimc0,
> - &s5p_device_fimc1,
> - &s5p_device_fimc2,
> - &s5p_device_fimc_md,
> &s3c_device_hsmmc0,
> &s3c_device_hsmmc1,
> &s3c_device_hsmmc2,
> @@ -946,14 +901,8 @@ static void __init goni_machine_init(void)
> /* FB */
> s3c_fb_set_platdata(&goni_lcd_pdata);
>
> - /* FIMC */
> - s3c_set_platdata(&goni_fimc_md_platdata,
> sizeof(goni_fimc_md_platdata),
> - &s5p_device_fimc_md);
> -
> s3c_hsotg_set_platdata(&goni_hsotg_pdata);
>
> - goni_camera_init();
> -
> /* SPI */
> spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
>
> --
> 1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
