S5PV210 is going to get DT support, so we can remove the camera
bits from the only board using camera on S5PV210. This allows to
clean the exynos4-is driver by dropping code for non-dt platforms.
This patch can be dropped if a patch removing the whole board
file is applied first.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-s5pv210/mach-goni.c | 51 -------------------------------------
1 file changed, 51 deletions(-)
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index b41a38a..6c719ec 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -49,11 +49,6 @@
#include <plat/clock.h>
#include <plat/samsung-time.h>
#include <plat/mfc.h>
-#include <plat/camport.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/noon010pc30.h>
#include "common.h"
@@ -285,14 +280,6 @@ static void __init goni_tsp_init(void)
/* USB OTG */
static struct s3c_hsotg_plat goni_hsotg_pdata;
-static void goni_camera_init(void)
-{
- s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
-
- /* Set max driver strength on CAM_A_CLKOUT pin. */
- s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
-}
-
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
@@ -825,34 +812,6 @@ static void goni_setup_sdhci(void)
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
-static struct noon010pc30_platform_data noon010pc30_pldata = {
- .clk_rate = 16000000UL,
- .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
- .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
-};
-
-static struct i2c_board_info noon010pc30_board_info = {
- I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
- .platform_data = &noon010pc30_pldata,
-};
-
-static struct fimc_source_info goni_camera_sensors[] = {
- {
- .mux_id = 0,
- .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
- .board_info = &noon010pc30_board_info,
- .i2c_bus_num = 0,
- .clk_frequency = 16000000UL,
- },
-};
-
-static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
- .source_info = goni_camera_sensors,
- .num_clients = ARRAY_SIZE(goni_camera_sensors),
-};
-
/* Audio device */
static struct platform_device goni_device_audio = {
.name = "smdk-audio",
@@ -874,10 +833,6 @@ static struct platform_device *goni_devices[] __initdata = {
&s5p_device_mixer,
&s5p_device_sdo,
&s3c_device_i2c0,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc_md,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
@@ -946,14 +901,8 @@ static void __init goni_machine_init(void)
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
- /* FIMC */
- s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
- &s5p_device_fimc_md);
-
s3c_hsotg_set_platdata(&goni_hsotg_pdata);
- goni_camera_init();
-
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
