[PATCH v6 3/4] dt-bindings: net: broadcom-bluetooth: Add pcm config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for pcm parameters.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 .../bindings/net/broadcom-bluetooth.txt       | 16 ++++++++++
 include/dt-bindings/bluetooth/brcm.h          | 32 +++++++++++++++++++
 2 files changed, 48 insertions(+)
 create mode 100644 include/dt-bindings/bluetooth/brcm.h

diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index c749dc297624..8561e4684378 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -29,10 +29,20 @@ Optional properties:
    - "lpo": external low power 32.768 kHz clock
  - vbat-supply: phandle to regulator supply for VBAT
  - vddio-supply: phandle to regulator supply for VDDIO
+ - brcm,bt-sco-routing: PCM, Transport, Codec, I2S
+ - brcm,bt-pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
+ - brcm,bt-pcm-frame-type: short, long
+ - brcm,bt-pcm-sync-mode: slave, master
+ - brcm,bt-pcm-clock-mode: slave, master
 
+See include/dt-bindings/bluetooth/brcm.h for SCO/PCM parameters. The default
+value for all these values are 0 (except for brcm,bt-sco-routing which requires
+a value) if you choose to leave it out.
 
 Example:
 
+#include <dt-bindings/bluetooth/brcm.h>
+
 &uart2 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart2_pins>;
@@ -40,5 +50,11 @@ Example:
        bluetooth {
                compatible = "brcm,bcm43438-bt";
                max-speed = <921600>;
+
+               brcm,bt-sco-routing        = <BRCM_SCO_ROUTING_TRANSPORT>;
+               brcm,bt-pcm-interface-rate = <BRCM_PCM_IF_RATE_512KBPS>;
+               brcm,bt-pcm-frame-type     = <BRCM_PCM_FRAME_TYPE_SHORT>;
+               brcm,bt-pcm-sync-mode      = <BRCM_PCM_SYNC_MODE_MASTER>;
+               brcm,bt-pcm-clock-mode     = <BRCM_PCM_CLOCK_MODE_MASTER>;
        };
 };
diff --git a/include/dt-bindings/bluetooth/brcm.h b/include/dt-bindings/bluetooth/brcm.h
new file mode 100644
index 000000000000..8b86f90d7dd2
--- /dev/null
+++ b/include/dt-bindings/bluetooth/brcm.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * This header provides constants for Broadcom bluetooth dt-bindings.
+ */
+#ifndef _DT_BINDINGS_BLUETOOTH_BRCM_H
+#define _DT_BINDINGS_BLUETOOTH_BRCM_H
+
+#define BRCM_BT_SCO_ROUTING_PCM			0
+#define BRCM_BT_SCO_ROUTING_TRANSPORT		1
+#define BRCM_BT_SCO_ROUTING_CODEC		2
+#define BRCM_BT_SCO_ROUTING_I2S			3
+
+/* Default is 128KBPs */
+#define BRCM_BT_PCM_INTERFACE_RATE_128KBPS	0
+#define BRCM_BT_PCM_INTERFACE_RATE_256KBPS	1
+#define BRCM_BT_PCM_INTERFACE_RATE_512KBPS	2
+#define BRCM_BT_PCM_INTERFACE_RATE_1024KBPS	3
+#define BRCM_BT_PCM_INTERFACE_RATE_2048KBPS	4
+
+/* Default should be short */
+#define BRCM_BT_PCM_FRAME_TYPE_SHORT		0
+#define BRCM_BT_PCM_FRAME_TYPE_LONG		1
+
+/* Default should be master */
+#define BRCM_BT_PCM_SYNC_MODE_SLAVE		0
+#define BRCM_BT_PCM_SYNC_MODE_MASTER		1
+
+/* Default should be master */
+#define BRCM_BT_PCM_CLOCK_MODE_SLAVE		0
+#define BRCM_BT_PCM_CLOCK_MODE_MASTER		1
+
+#endif /* _DT_BINDINGS_BLUETOOTH_BRCM_H */
-- 
2.24.0.432.g9d3f5f5b63-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux