From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Add the remoteproc node for the modem on msm8974. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> [luca@xxxxxxxxx: cleanups, add label to smd-edge node] Signed-off-by: Luca Weiss <luca@xxxxxxxxx> --- Note: This patch needs "remoteproc: qcom_q6v5_mss: Validate each segment during loading" from the mailing list to be functional. arch/arm/boot/dts/qcom-msm8974.dtsi | 63 ++++++++++++++++++++++++----- 1 file changed, 54 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 6f24dc9a7924..b357cb51c0fb 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -21,12 +21,12 @@ reserved-memory { #size-cells = <1>; ranges; - mpss@8000000 { + mpss_region: mpss@8000000 { reg = <0x08000000 0x5100000>; no-map; }; - mba@d100000 { + mba_region: mba@d100000 { reg = <0x0d100000 0x100000>; no-map; }; @@ -62,8 +62,11 @@ rfsa@fd60000 { }; rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; reg = <0x0fd80000 0x180000>; no-map; + + qcom,client-id = <1>; }; }; @@ -807,6 +810,55 @@ rng@f9bff000 { clock-names = "core"; }; + remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + pronto: remoteproc@fb21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; @@ -1524,13 +1576,6 @@ adsp { qcom,smd-edge = <1>; }; - modem { - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - }; - rpm { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; -- 2.24.0