Add IPI mailbox property and its example in xilinx zynqmp-power
documentation.
Signed-off-by: Rajan Vaja <rajan.vaja@xxxxxxxxxx>
---
.../bindings/power/reset/xlnx,zynqmp-power.txt | 41 ++++++++++++++++++++--
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
index d366f1e..450f3a4 100644
--- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -8,9 +8,27 @@ Required properties:
- compatible: Must contain: "xlnx,zynqmp-power"
- interrupts: Interrupt specifier
--------
-Example
--------
+Optional properties:
+ - mbox-names : Name given to channels seen in the 'mboxes' property.
+ "rx" - Mailbox corresponding to receive path
+ "tx" - Mailbox corresponding to transmit path
+ - mboxes : Standard property to specify a Mailbox. Each value of
+ the mboxes property should contain a phandle to the
+ mailbox controller device node and an args specifier
+ that will be the phandle to the intended sub-mailbox
+ child node to be used for communication. See
+ Documentation/devicetree/bindings/mailbox/mailbox.txt
+ for more details about the generic mailbox controller
+ and client driver bindings. Also see
+ Documentation/devicetree/bindings/mailbox/ \
+ xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+ is used to communicate with this System controllers.
+
+--------
+Examples
+--------
+
+Example with interrupt method:
firmware {
zynqmp_firmware: zynqmp-firmware {
@@ -23,3 +41,20 @@ firmware {
};
};
};
+
+Example with IPI mailbox method:
+
+firmware {
+
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ mboxes = <&ipi_mailbox_pmu0 0>,
+ <&ipi_mailbox_pmu0 1>;
+ mbox-names = "tx", "rx";
+ };
+ };
+};
--
2.7.4
