Hi Boris, On Wed, Mar 12, 2014 at 07:07:36PM +0100, Boris BREZILLON wrote: > Define a struct containing the standard NAND timings as described in NAND > datasheets. > > Signed-off-by: Boris BREZILLON <b.brezillon.dev@xxxxxxxxx> > --- > include/linux/mtd/nand.h | 49 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > > diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h > index 389b3c5..f3ff3a3 100644 > --- a/include/linux/mtd/nand.h > +++ b/include/linux/mtd/nand.h > @@ -846,4 +846,53 @@ static inline bool nand_is_slc(struct nand_chip *chip) > { > return chip->bits_per_cell == 1; > } > + > +/** > + * struct nand_sdr_timings - SDR NAND chip timings > + * > + * This struct defines the timing requirements of a SDR NAND chip. > + * These informations can be found in every NAND datasheets and the timings > + * meaning are described in the ONFI specifications: > + * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing Can you remove the unicode U+200E character? > + * Parameters) Please document the units for these fields here. It looks like you're using picoseconds. > + * > + */ > + Extra blank line. > +struct nand_sdr_timings { > + u32 tALH_min; > + u32 tADL_min; > + u32 tALS_min; > + u32 tAR_min; > + u32 tCEA_max; > + u32 tCEH_min; > + u32 tCH_min; > + u32 tCHZ_max; > + u32 tCLH_min; > + u32 tCLR_min; > + u32 tCLS_min; > + u32 tCOH_min; > + u32 tCS_min; > + u32 tDH_min; > + u32 tDS_min; > + u32 tFEAT_max; > + u32 tIR_min; > + u32 tITC_max; > + u32 tRC_min; > + u32 tREA_max; > + u32 tREH_min; > + u32 tRHOH_min; > + u32 tRHW_min; > + u32 tRHZ_max; > + u32 tRLOH_min; > + u32 tRP_min; > + u32 tRR_min; > + u64 tRST_max; > + u32 tWB_max; > + u32 tWC_min; > + u32 tWH_min; > + u32 tWHR_min; > + u32 tWP_min; > + u32 tWW_min; > +}; > + > #endif /* __LINUX_MTD_NAND_H */ Brian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html