On 07 November 2019 10:04, Christoph Fritz wrote:
> This patch adds DT description of da906x buck regulator modes.
Just the renames from da906x to da9063 required as per 01 patch comments
>
> Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/mfd/da9062.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt
> b/Documentation/devicetree/bindings/mfd/da9062.txt
> index edca653..5989411 100644
> --- a/Documentation/devicetree/bindings/mfd/da9062.txt
> +++ b/Documentation/devicetree/bindings/mfd/da9062.txt
> @@ -66,6 +66,9 @@ Sub-nodes:
> details of individual regulator device can be found in:
> Documentation/devicetree/bindings/regulator/regulator.txt
>
> + regulator-initial-mode may be specified for buck regulators using mode values
> + from include/dt-bindings/regulator/dlg,da906x-regulator.h.
> +
> - rtc : This node defines settings required for the Real-Time Clock associated
> with the DA9062. There are currently no entries in this binding, however
> compatible = "dlg,da9062-rtc" should be added if a node is created.
> @@ -96,6 +99,7 @@ Example:
> regulator-max-microvolt = <1570000>;
> regulator-min-microamp = <500000>;
> regulator-max-microamp = <2000000>;
> + regulator-initial-mode =
> <DA906X_BUCK_MODE_SYNC>;
> regulator-boot-on;
> };
> DA9062_LDO1: ldo1 {
> --
> 2.1.4
