Re: [PATCH 2/4] ARM: dts: bcm2711: Enable PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 06, 2019 at 10:45:24PM +0100, Nicolas Saenz Julienne wrote:
> This enables bcm2711's PCIe bus, wich is hardwired to a VIA Technologies

s/wich/which/

> XHCI USB 3.0 controller.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> ---
>  arch/arm/boot/dts/bcm2711.dtsi | 47 ++++++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index a9d84e28f245..c7b2e7b57da6 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -288,6 +288,53 @@
>  		arm,cpu-registers-not-fw-configured;
>  	};
>  
> +	scb {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +
> +		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
> +			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
> +
> +		pcie_0: pcie@7d500000 {
> +			compatible = "brcm,bcm2711-pcie";
> +			reg = <0x0 0x7d500000 0x9310>;
> +			msi-controller;
> +			msi-parent = <&pcie_0>;
> +			#address-cells = <3>;
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			linux,pci-domain = <0>;

pci-domain is unlikely to be needed here.

> +			brcm,enable-ssc;
> +			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "pcie", "msi";
> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
> +							IRQ_TYPE_LEVEL_HIGH
> +					 0 0 0 2 &gicv2 GIC_SPI 144
> +							IRQ_TYPE_LEVEL_HIGH
> +					 0 0 0 3 &gicv2 GIC_SPI 145
> +							IRQ_TYPE_LEVEL_HIGH
> +					 0 0 0 4 &gicv2 GIC_SPI 146
> +							IRQ_TYPE_LEVEL_HIGH>;
> +
> +			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
> +				  0x0 0x04000000>;

Is legacy I/O supported by this controller?

> +			/*
> +			 * The wrapper around the PCIe block has a bug
> +			 * preventing it from accessing beyond the first 3GB of
> +			 * memory. As the bus DMA mask is rounded up to the
> +			 * closest power of two of the dma-range size, we're
> +			 * forced to set the limit at 2GB. This can be
> +			 * harmlessly changed in the future once the DMA code
> +			 * handles non power of two DMA limits.
> +			 */
> +			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
> +				      0x0 0x80000000>;
> +		};
> +	};

Thanks,

Andrew Murray

> +
>  	cpus: cpus {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> -- 
> 2.23.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux