For configuration of fuel gauge alert for a low level state of charge interrupt we add a function to config level threshold and a device tree binding property to set it in flatned device tree node. Now we can use "maxim,alert-low-soc-level" property with the values from 1% up to 32% to configure alert interrupt threshold. Signed-off-by: Matheus Castello <matheus@xxxxxxxxxxxxxxx> --- drivers/power/supply/max17040_battery.c | 75 ++++++++++++++++++++++--- 1 file changed, 67 insertions(+), 8 deletions(-) diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c index 9909f8cd7b5d..3fc9e1c7b257 100644 --- a/drivers/power/supply/max17040_battery.c +++ b/drivers/power/supply/max17040_battery.c @@ -29,6 +29,9 @@ #define MAX17040_DELAY 1000 #define MAX17040_BATTERY_FULL 95 +#define MAX17040_ATHD_MASK 0xFFC0 +#define MAX17040_ATHD_DEFAULT_POWER_UP 4 + struct max17040_chip { struct i2c_client *client; struct delayed_work work; @@ -43,6 +46,8 @@ struct max17040_chip { int soc; /* State Of Charge */ int status; + /* Low alert threshold from 32% to 1% of the State of Charge */ + u32 low_soc_alert; }; static int max17040_get_property(struct power_supply *psy, @@ -99,6 +104,21 @@ static void max17040_reset(struct i2c_client *client) max17040_write_reg(client, MAX17040_CMD, 0x0054); } +static int max17040_set_low_soc_alert(struct i2c_client *client, u32 level) +{ + int ret; + u16 data; + + level = 32 - level; + data = max17040_read_reg(client, MAX17040_RCOMP); + /* clear the alrt bit and set LSb 5 bits */ + data &= MAX17040_ATHD_MASK; + data |= level; + ret = max17040_write_reg(client, MAX17040_RCOMP, data); + + return ret; +} + static void max17040_get_vcell(struct i2c_client *client) { struct max17040_chip *chip = i2c_get_clientdata(client); @@ -115,7 +135,6 @@ static void max17040_get_soc(struct i2c_client *client) u16 soc; soc = max17040_read_reg(client, MAX17040_SOC); - chip->soc = (soc >> 8); } @@ -161,6 +180,24 @@ static void max17040_get_status(struct i2c_client *client) chip->status = POWER_SUPPLY_STATUS_FULL; } +static int max17040_get_of_data(struct max17040_chip *chip) +{ + struct device *dev = &chip->client->dev; + struct device_node *np = dev->of_node; + int ret = 0; + + if (of_property_read_u32(np, "maxim,alert-low-soc-level", + &chip->low_soc_alert)) { + chip->low_soc_alert = MAX17040_ATHD_DEFAULT_POWER_UP; + } else if (chip->low_soc_alert <= 0 || + chip->low_soc_alert >= 33) { + /* low_soc_alert is not between 1% and 32% */ + ret = -EINVAL; + } + + return ret; +} + static void max17040_check_changes(struct i2c_client *client) { max17040_get_vcell(client); @@ -192,6 +229,9 @@ static irqreturn_t max17040_thread_handler(int id, void *dev) /* send uevent */ power_supply_changed(chip->battery); + /* reset alert bit */ + max17040_set_low_soc_alert(client, chip->low_soc_alert); + return IRQ_HANDLED; } @@ -230,6 +270,7 @@ static int max17040_probe(struct i2c_client *client, struct i2c_adapter *adapter = client->adapter; struct power_supply_config psy_cfg = {}; struct max17040_chip *chip; + int ret; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) return -EIO; @@ -240,6 +281,12 @@ static int max17040_probe(struct i2c_client *client, chip->client = client; chip->pdata = client->dev.platform_data; + ret = max17040_get_of_data(chip); + if (ret) { + dev_err(&client->dev, + "failed: low SOC alert OF data out of bounds\n"); + return ret; + } i2c_set_clientdata(client, chip); psy_cfg.drv_data = chip; @@ -256,14 +303,26 @@ static int max17040_probe(struct i2c_client *client, /* check interrupt */ if (client->irq) { - int ret; - - ret = max17040_enable_alert_irq(chip); - - if (ret) { - client->irq = 0; + if (of_device_is_compatible(client->dev.of_node, + "maxim,max77836-battery")) { + ret = max17040_set_low_soc_alert(client, + chip->low_soc_alert); + if (ret) { + dev_err(&client->dev, + "Failed to set low SOC alert: err %d\n", + ret); + return ret; + } + + ret = max17040_enable_alert_irq(chip); + if (ret) { + client->irq = 0; + dev_warn(&client->dev, + "Failed to get IRQ err %d\n", ret); + } + } else { dev_warn(&client->dev, - "Failed to get IRQ err %d\n", ret); + "Device not compatible for IRQ"); } } -- 2.24.0.rc2