Re: [PATCH 1/2] dt-bindings: power/supply: Document generic USB charger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 5, 2019 at 3:16 AM Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
>
> Hi Rob,
>
>
> Le lun., nov. 4, 2019 at 07:52, Rob Herring <robh+dt@xxxxxxxxxx> a
> écrit :
> > On Sun, Nov 3, 2019 at 4:08 PM Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> > wrote:
> >>
> >>  Add documentation about the devicetree bindings for the generic USB
> >>  charger.
> >
> > What makes it generic?
>
> It only uses the USB PHY subsystem, which already has some half-baked
> support for chargers but not bound to the power-supply subsystem.
>
>
> >>
> >>  Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> >>  ---
> >>   .../bindings/power/supply/usb-charger.txt     | 24
> >> +++++++++++++++++++
> >>   1 file changed, 24 insertions(+)
> >>   create mode 100644
> >> Documentation/devicetree/bindings/power/supply/usb-charger.txt
> >>
> >>  diff --git
> >> a/Documentation/devicetree/bindings/power/supply/usb-charger.txt
> >> b/Documentation/devicetree/bindings/power/supply/usb-charger.txt
> >>  new file mode 100644
> >>  index 000000000000..fd46734cb0e5
> >>  --- /dev/null
> >>  +++ b/Documentation/devicetree/bindings/power/supply/usb-charger.txt
> >>  @@ -0,0 +1,24 @@
> >>  +Generic USB charger bindings
> >>  +~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >>  +
> >>  +Required properties :
> >>  + - compatible : should be "usb-charger"
> >>  + - phys: phandle to the USB PHY
> >>  +
> >>  +Example:
> >>  +
> >>  +usb_con: extcon {
> >>  +       compatible = "linux,extcon-usb-gpio";
> >>  +       vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
> >>  +};
> >>  +
> >>  +usb_phy: usb-phy@0 {
> >>  +       compatible = "usb-nop-xceiv";
> >>  +       #phy-cells = <0>;
> >>  +       extcon = <&usb_con>;
> >
> > extcon is deprecated in favor of usb-connector binding. See
> > .../bindings/connector/usb-connector.txt. There's also some pending
> > patches for adding GPIO based connector controls including Vbus sense
> > (GPIO input) and control (regulator via a GPIO).
> >
> > Rob
>
> I understand that the usb-connector binding is better, but the current
> code doesn't integrate at all with the USB PHY subsystem, which has its
> own code to handle ID and VBUS GPIOs and supports notifiers. Is that
> deprecated then?
>
> What's the big picture here?

Does this series work for you?:

https://patchwork.kernel.org/cover/11120707/




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux