Hi, This series is to add pinctrl & GPIO controller driver for a new SoC. Patch 1 adds pinmux & GPIO controller driver. Patch 2 adds the corresponding dt bindings YAML document. Patches are against Linux 5.4-rc1 at below Git tree: git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git v3: - Add locking for GPIO IRQ ops. - Fix property naming mistake in dt bindings document. - Address other code quality related review concerns. - Fix a build error reported by kbuild test robot. - Remove deleted structure fields from comments. v2: - Enable GENERIC_PINMUX_FUNCTIONS & GENERIC_PINCTRL_GROUPS and use core provided code for pinmux_ops & pinctrl_ops. Remove related code from the driver. - Enable GENERIC_PINCONF & use core provided pinconf code. Remove related code from the driver. - Use GPIOLIB_IRQCHIP framework core code instead of implementing separtely in the driver. - Enable GPIO_GENERIC and switch to core provided memory mapped GPIO banks design. - Use standard pinctrl DT properties instead of custom made properties. - Address review concerns for dt bindings document. - Address code quality related review concerns. v1: - Initial version. Rahul Tanwar (2): pinctrl: Add pinmux & GPIO controller driver for a new SoC dt-bindings: pinctrl: intel: Add for new SoC .../bindings/pinctrl/intel,lgm-pinctrl.yaml | 114 +++ drivers/pinctrl/Kconfig | 18 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-equilibrium.c | 964 +++++++++++++++++++++ drivers/pinctrl/pinctrl-equilibrium.h | 141 +++ 5 files changed, 1238 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml create mode 100644 drivers/pinctrl/pinctrl-equilibrium.c create mode 100644 drivers/pinctrl/pinctrl-equilibrium.h -- 2.11.0
