Add initial dt bindings for the interconnects inside i.MX chips. Multiple external IPs are involved but SOC integration means the software controllable interfaces are very similar. Single node also acts as interconnect provider if #interconnect-cells is present. Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx> Acked-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx> --- .../devicetree/bindings/devfreq/imx.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/devfreq/imx.yaml diff --git a/Documentation/devicetree/bindings/devfreq/imx.yaml b/Documentation/devicetree/bindings/devfreq/imx.yaml new file mode 100644 index 000000000000..bfc825407764 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/imx.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/devfreq/imx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic i.MX bus frequency device + +maintainers: + - Leonard Crestez <leonard.crestez@xxxxxxx> + +description: | + The i.MX SoC family has multiple buses for which clock frequency (and + sometimes voltage) can be adjusted. + + Some of those buses expose register areas mentioned in the memory maps as GPV + ("Global Programmers View") but not all. Access to this area might be denied + for normal (non-secure) world. + + The buses are based on externally licensed IPs such as ARM NIC-301 and + Arteris FlexNOC but DT bindings are specific to the integration of these bus + interconnect IPs into imx SOCs. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx8mn-nic + - fsl,imx8mm-nic + - fsl,imx8mq-nic + - const: fsl,imx8m-nic + - items: + - enum: + - fsl,imx8mn-noc + - fsl,imx8mm-noc + - fsl,imx8mq-noc + - const: fsl,imx8m-noc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + operating-points-v2: true + + devfreq: + description: | + Phandle to another devfreq device to match OPPs with by using the + passive governor. + $ref: "/schemas/types.yaml#/definitions/phandle" + + '#interconnect-cells': + description: | + If specified then also act as an interconnect provider. Should only be + set once per soc on main noc. + const: 1 + + interconnect-node-id: + description: | + i.MX chips have multiple scalable buses based on the same IP, this is + used to distinguish between. Uses same identifier namespace as consumer + "interconnects" property, for example one of the values in + "include/dt-bindings/interconnect/imx8mm.h" + + const: 1 + +required: + - compatible + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + noc: noc@32700000 { + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MM_CLK_NOC>; + operating-points-v2 = <&noc_opp_table>; + }; -- 2.17.1
